Garmin Marine Accessories

Garmin’s GPS24XD HVS GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes NMEA0183 Bare wire connection, under-deck, pole and surface mount options.

Garmin Trolling Motor Mount for GT36UHD and GT56UHD Transducers. Can be used as a secondary mount or replacement as this is the same trolling motor mount that came with the GT36 and GT56 originally.

Position your Panoptix LiveScope LVS32 transducer on this 0° pole mount for an optimal viewing angle while ice fishing or open water fishing!

Protect your Garmin GPSMAP 8x16 series GPS display from scratches and sun when not in use!

Display Cover for STRIKER Plus 4/4cv and STRIKER Vivid 4cv.

The Garmin Power Cable for inReach Mini provides a convenient power option! One end features a MicroUSB connection and the other contains bare wire power/ground leads.

The Garmin LVS32 stainless steel transom mount allows for the mounting of your Garmin LVS32 transducer to the transom of your boat. The LVS32 transducer is included in the Garmin Livescope Sonar System.

The Garmin USB Voice Control Bundle allows you to pair a compatible Garmin chartplotter to a compatible microphone or headset for voice control features.

Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter using this Garmin adapter plate. 

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 6-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 7-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

The Garmin GMR Voltage Converter is compatible with Garmin xHD3 Open Array Radars. The GMR Voltage Converter enables GMR xHD3 4kW radars to achieve a 100-knot wind rating.

The Garmin GT56UHD-TR is a trolling motor mounted transducer designed for use with the Garmin Force Kraken 63-inch trolling motor. Receive ultra high definition sonar views of fish and structure below and to the left and right of your vessel!

The Garmin GT56UHD-TR is a trolling motor mounted transducer designed for use with the Garmin Force Kraken 75-inch trolling motor. Receive ultra high definition sonar views of fish and structure below and to the left and right of your vessel!

Connect your compatible trolling motor foot pedal to a 12V, 24V or 36V power source with this cable, which features a 2-pin, threaded power connector and bare end wires.

Pair Garmin's wireless foot pedal with your Force or Force Kraken trolling motor for instant control and responsiveness. Simplified, Wireless connection yet feels and operates just like a cable-steered pedal. Operates using AA batteries or it can be hardwire installed with the optional Foot Pedal Power Cable.

Using your Force Trolling Motor in areas with heavy vegatation? Garmin's Weedless propeller is designed to prevent weeds from tangling around the prop and shaft.

Garmin small connector network cable with right angle, 15m (50 feet).

Looking for a replacement propeller for your Force Trolling Motor? This is the exact propeller that was included with your Force - Garmin's High Efficiency propeller runs longer and quieter!

The Nose Cone with Transducer Mount allows you to replace the standard part of your Force Kraken trolling motor or to install a compatible Garmin transducer, compatible transducers listed below.

The Garmin Nose Cone for Kraken trolling motors is designed to replace the standard part of your Force Kraken trolling motor or to install third-party accessories.

The Garmin Transducer Replacement Kit allows you to easily replace or upgrade the built-in transducer on your Garmin trolling motor.

The Garmin 8-Pin 10' Transducer Extension Cable is compatible with Garmin GT12IHF and GT15IHF transducers.

The Garmin 8-Pin 30' Transducer Extension Cable is compatible with Garmin GT12IHF and GT15IHF transducers.

The Small Ice Fishing Kit from Garmin is designed for your smaller 4", 5" or 6" STRIKER and ECHOMAP units and includes a Bag with Handle, Power Cable, GT8HW-IF Transducer, Foam Float, Cable Grommet Rechargeable Battery and Charger.
Requires compatible display, not included. Sold separately.

The Large Ice Fishing Kit from Garmin is designed for your larger 7" or 9" STRIKER and ECHOMAP units and includes a Bag with Handle, Power Cable, 8-pin to 4-pin transducer adapter cable, GT10HN-IF Transducer, Foam Float, Cable Grommet Rechargeable Battery and Charger.
Requires compatible display, not included. Sold separately.

The Garmin BlueNet Network to RJ45 Adapter Cable connects compatible Garmin devices with a Garmin RJ45 port to the Garmin BlueNet network.

Power your compatible Garmin chartplotter or sonar module with this 2-pin, 6-foot power cable. See compatibility list below.

The Garmin BlueNet 30 Gateway allows legacy Garmin marine devices to network with Garmin BlueNet network units.

The Garmin BlueNet 20 Switch increases the number of network ports in a Garmin BlueNet network. Expand your high-speed network with the BlueNet 20 Switch!

Garmin Bail Mount with Quick Release for Echomap Ultra 2 10" Displays. Compatible with echomap Ultra 2 102sv & 106sv.

Protective cover for Garmin Echomap Ultra 2 12" Displays. Compatible with Echomap Ultra 2 Displays Only!

The MSC 10 from Garmin is a marine satellite compass with GPS based heading sensor and a fully integrated AHRS (attitude and heading reference system) for better position in all environments including pitching in rough seas. Multi-Band GNSS and Multi-Constellation receiver offers enhanced accuracy and connects via NMEA2000.
Color: Black

Add some extra cable to your compatible Garmin VHF radio with this 12-pin, 10-meter fist mic extension cable. See compatibility list below.