NAC-2 is the Core of your Autopilot Setup
The Simrad NAC-2 Autopilot Computer is the brains behind your autopilot operation. Designed to helm a boat across a broad range of weather conditions and sea-states with a max clutch output of 3 amps, this computer has all the electronics needed to operate a hydraulic steering or mechanical drive unit. This is all while still interfacing with other components such as heading sensors and rudder feedback units. Suitable for vessels up to 35’ (10M) long, the NAC-2 Autopilot Computer is designed for low-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves (8 continuous amps/16 peak amps).
Being built with Virtual Rudder Feedback (VRF) eliminates the need to install a separate rudder feedback unit on outboard and sterndrive boats. This reduces overall autopilot system cost and complexity, making it ideal where a feedback unit is impractical due to mechanical constraints. However, for all of you Simrad RF25 and RF25N users, the NAC-2 does support both rudder sensors.
The NAC-2 is easily installed via plug-and-play connectors to your NMEA 2000 backbone, minimizing the wiring necessary to install your autopilot system. NMEA 2000 compatibility offers simple connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays.
For Complete autopilot setup, a compatible Simrad or B&G display, and pump/drive are required.
Simrad NAC-2 Autopilot Computer Box Contents
Each Simrad NAC-2 Autopilot Computer Comes with:
- Simrad NAC-2 Autopilot Computer
- NMEA2000 T Connector and 0.6M NMEA Drop Cable
- NAC-2 Drive Cable
- NAC-2 Power Cable
- NAC-2 Rudder Feedback Cable
- Two Year Warranty
Simrad NAC-2 Autopilot Computer Key Features
- Designed for Boats up to 10M (35’)
- Plug and Play connectors for simplified installation
- NMEA2000 Connectivity
- Supports Simrad’s RF25 Rudder Feedback
- Virtual Rudder Feedback (VRF) for easy installion aboard outboard and sterndrive boats
- Size: 6.63"W x 2.2"H x 7.5“D
Product Accessories for Simrad NAC-2 Autopilot Computer
Our Price:$24.95
SKU: NM5301
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Our Price:$29.95
SKU: NM1701
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Our Price:$48.95
SKU: NM1708
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$31.95
SKU: NM1702
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Our Price:$179.95
SKU: NM2KSTR
Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.
Our Price:$699.00
SKU: NVX12607001
Navico Precision-9 Compass
Navico's Precision-9 Compass provides heading and rate-of-turn information to Simrad, B&G and Lowrance autopilot, radar and navigation systems. NMEA2000 Connectivity.
Our Price:$39.95
SKU: NM1704
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Our Price:$20.95
SKU: NMFACFST
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$20.95
SKU: NMFACMST
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$1,049.00
SKU: NV13894001
Simrad AP48 Autopilot Controller
Simrad’s AP48 Autopilot Controller allows for complete control of your Simrad Autopilot. No Drift steering, depth contour tracking and automated turn patterns are all controlled from the 4.1” low profile, glass display.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$349.00
SKU: NVX10756001
Simrad RF25N Rudder Reference
The Simrad RF25N rudder feedback is a medium duty rudder feedback that translates the angular travel of the rudder to a connected NMEA 2000 device. The RF25N connects via NMEA 2000 and features an attached 5.5m cable.
Our Price:$31.95
SKU: NM1703
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Our Price:$49.95
SKU: NM1801
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Our Price:$949.00
SKU: NV15444002
Simrad Pump-2 12v Hydraulic Autopilot Pump
The Simrad Pump-2 Reversible hydraulic gear pump is designed for boats up to 35ft. in length with a cylinder displacement of 4.9-15.2 cubic inches.
Our Price:$389.00
SKU: NV12316001
Lowrance WR10 Wireless Remote
The Lowrance WR10 Wireless Remote provides you the ability to take control of your autopilot from anywhere on your boat with this easy to use, pocket size, wireless remote controller. Includes BT1 Bluetooth Base Station.
Our Price:$659.00
SKU: NV13289001
Simrad AP44 Autopilot Controller
Simrad’s AP44 Autopilot Controller is perfect for the mariner interested in conveniently and easily controlling the functions of their autopilot. Rotary dial and button control, The AP44 has a 4.1-inch glass, color display. Simple setup and automatic tuning.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$29.95
SKU: NM1702M
Maretron NMEA 2000 Backbone/Drop Cable 2 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.
Our Price:$13.95
SKU: NM5801
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$13.95
SKU: NM5501
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$24.95
SKU: NMITCMCF
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Our Price:$299.00
SKU: NV13287001
Simrad OP12 Autopilot Controller
Simrad's OP12 wired remote provides simple integration with Simrad autopilot systems to provide mode control, course adjustments, and power steering. The OP 12 remote can be combined with the IS42 Color Instrument Display as a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.
