Furuno Accessories

The HUB102 From Furuno simplifies connectivity of multiple sensors or Multi-function Displays! Providing 5 data ports, the HUB102 features water resistant connections and sealed covers protecting unused data ports.

Furuno external GPS Antenna for GP1670F and 1870F. Also the replacement antenna for the 1650/1850 Series, 7000 Series, GP31, GP32 and GP33. 10 Meter Cable with TNC connector.

Furuno Snap On Front Display Cover.

The Furuno AIR-033-073 Adapter Cable adapts 10-Pin Furuno Transducers to Furuno Fishfinders with 8-Pin Transducer Connector. Length: 1 Meter.

Furuno Power Cable Assembly for 1623,1715

Furuno Display/Protective Cover for GP33 and RD33 Displays.

This Furuno cable is dual purpose it is the Power Cable for an FCV 620/585 and also the NMEA 0183 for GP33. Cable will not provide power to a GP-33.

Furuno Power Data Cable for GP31, GP32, GP36 and GP37.

The Furuno AIR-033-204 Adapter Cable adapts 8-Pin Furuno Transducers to Furuno Fishfinders with 10-Pin Transducer Connector. Length: 1 Meter.

The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.

Furuno's FI5002 6-Port Junction Box supports both 12VDC and 24VDC Networks, has 2 NMEA2000 backbone ports and allows up to 6 NMEA2000 components to be networked together.

Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.

Furuno Display Mounting Knob - 2 pieces required.

Furuno F-Type (Front Mount) Flush Mount Kit for Furuno GP39

Furuno Mounting Bracket for TZT3 12" Displays. Includes bracket mount and knobs.

Furuno Pole Mount for SCX20 and SCX21 Satellite Compass.

The Furuno DRS AX and NXT Signal/Power Cable is compatible with Furuno DRS AX and DRS NXT Radars. The Furuno Signal/Power Cable is a required component for your Furuno radar.
Size: 10M

Furuno mounting bracket for TZT3 16" displays. Includes bracket mount and knobs.

The Furuno power cable for the Furuno DRS4W Wireless Radar measures 15M in length. The Furuno DRS4W Wireless Radar requires a power cable.

This Furuno Cable will allow you to connect two TZTouchXL units together or connect to a network hub. 2M total length with Waterproof RJ45 connectors on both ends.

This Furuno Cable will allow you to connect two TZTouchXL units together or connect to a network hub. 10M total length with Waterproof RJ45 connectors on both ends.

Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.

Furuno NavNet Hub Adapter Cable, 6P(M) - RJ45(M), 0.5 Meters

Furuno NMEA Cable, 1 x 7 Pin Connector, 5 Meters

Furuno NMEA Cable, 1 x 6 Pin Connector, 5 Meters.

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

This Furuno Cable will allow you to connect two network units together or connect to a network hub. 2M total length with RJ45 connectors on both ends.

This Furuno Cable will allow you to connect a NavNet compatible devices to a network hub. 0.5M total length with a 6 Pin to RJ45 connectors on each end.

Furuno Display Cover for FCV 585, FCV 587, FCV 588 Fishfinders and Furuno 1815 Radar.

Furuno 10M Signal Cable for 1623 and 1715 radars.

Furuno Power Data Cable for FCV 600L, FCV 582L, and 7000

Furuno PSU012 Power Supply Unit for Radar Units.

Furuno 10 Pin Transducer Extension Cable

Furuno Transducer Y-Cable 10 Pin

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

3M Furuno Power Cable for 7" Navnet units

Furuno 5M power Cable for 10" NavNet Displays.

Furuno Clip-on Plastic Transom Mount Speed and Temperature Sensor

Power Cable for Navnet 3D MFD12

Furuno Display Mounting Knob - 2 pieces required

The Furuno MB1100 Transducer Matching Box with 10pin Connector is used to connect specific transducer with no connector to Furuno 10 pin connector Fishfinders.

Furuno PSU017 Power Supply Unit for Radar Units.

Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.

Furuno Power cable for GP1670F & GP1870F. This is the exact power cable that originally came with your GP1670 or GP1870F unit.

Furuno's TZTL15F Bracket Mount and Knobs. Mount your TZTouch 2 15" display to a flat surface with this bracket with adjustable angle for optimum viewing.

Furuno's TZTL12F Bracket Mount and Knobs. Mount your TZTouch 2 12" display to a flat surface with this bracket with adjustable angle for optimum viewing.

Furuno's MCU004 Remote provides Keyed Operation of the TZtouch and TZtouch2 and TZTouch3 displays. 10 Hardware Keys consisting of Large rotary knob with Joystick and 8 hard buttons provide near complete control of your TZtouch setup.

Furuno S-Type (Side Mount) Flush Mount Kit for Furuno GP39