Garmin Marine Accessories

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin Marine Network Cable (20').

Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.

Marine Network Cable PoE Isolation Coupler, Required when installing a FLIR camera on a Garmin Marine Network. Also requires an additional Garmin Marine Network Cable to connect from Coupler to MFD.

Garmin Protective Cover for ECHOMAP Ultra 102sv and 106sv.

Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units

Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.

Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv,  922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243 and 1243xsv. 

Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).

Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.

The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.

Garmin Marine Network Cable (6').

Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, ECHOMAP UHD2 and GPSMAP 1242xsv Chartplotter Fishfinders.

Garmin NMEA 2000 Multiport T-Connector.

Garmin Heavy Duty Transom Mount with Spray Shield

Protect your Garmin GPSMAP 9x3 series GPS display from scratches and sun when not in use!

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 9-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

The Garmin instrument display protective cover shields your Garmin instrument display from the elements. Compatible with GHC 20, GMI 20, GNX 20, GNX 21 and GNX Wind Displays. 

The Large Ice Fishing Kit from Garmin is designed for your larger 7" or 9" STRIKER and ECHOMAP units and includes a Bag with Handle, Power Cable, 8-pin to 4-pin transducer adapter cable, GT10HN-IF Transducer, Foam Float, Cable Grommet Rechargeable Battery and Charger.
Requires compatible display, not included. Sold separately.

Protect your Garmin GPSMAP 12x3 series GPS display from scratches and sun when not in use!

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Looking for a replacement or additional mount for your 4" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with Garmin echoMAP 43/44dv, echoMAP CHIRP 42/43/44/45dv and echoMAP Plus 42/43/44/45cv models.

Garmin Cigarette Lighter Adapter for echoMAP/Striker units with a 4 Pin Power Cable.

Garmin 6' Power/Data cable for all ECHOMAP Ultra units. Includes NMEA0183 Input/Output.

Protect your Garmin GPSMAP 8x12 series GPS display from scratches and sun when not in use!

Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units

Garmin's USB Card reader with USB-C adapter cable pairs with your compatible chartplotter and accepts up to 2 Full Sized SD Cards. Simplifies access to charts, software updates and ActiveCaptain® data. Compatible with GPSMAP 16x3, 8400, 8600, 9000 and 9200 Series Chartplotter/Fishfinders.

Garmin's Transom Mount bracket allows you to attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat providing excellent sonar returns at all speeds.

Garmin Marine Network Cable (40').

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

Garmin 10' Transducer Extension Cable for 4-Pin Transducers.

Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.

The Garmin GRID Garmin Remote Input Device offers maximum control of your GPSMAP 7x2, 7x2xs,9x2,9x2xs, 10x2, 10x2xs, 12x2,12x2xs, 7600, 7600xsv and  8000 Glass Helm series without ever touching the crystal clear glass display. Rotary knob and joystick enable you to easily navigate thru menus and screens on any number of networked displays.

Garmin 8-Pin 30' Transducer Extension Cable.

Garmin Bracket Mount with Quick Release for 7" CHIRP CV and DV units.

Garmin Spray Shield for DownVu/SideVu Transducers

Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.

Flush Mount kit for Garmin echoMAP Plus and UHD 62cv, 63cv, 64cv and 65cv.

Control your Garmin Reactor Autopilot right from a remote. This rugged and water resistant remote provides the ultimate onboard control and convenience. Control steering and even use the remote for heading hold and course corrections! (compatible with Compact Reactor, Reactor 40 Steer by Wire and Reactor 40 Hydraulic)

The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.

The GRID 20 from Garmin allows remote access to your entire Garmin marine system. Includes a 360° joystick with rotary knob and push to select button control. Available in Vertical or Horizontal orientation.

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 10" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.