2 Day Shipping for Delivery by Christmas!
Garmin Marine Network Cable (20').
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.
The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Garmin Marine Network Cable (40').
Raymarine RayNet to SeaTalk HS Network Cable 3 Meter.
Raymarine Converter kit allows select SeaTalk 1 devices to interface and communicate on the SeaTalk NG data network. Plug and Play insallation.
Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.
The Garmin GRID Garmin Remote Input Device offers maximum control of your GPSMAP 7x2, 7x2xs,9x2,9x2xs, 10x2, 10x2xs, 12x2,12x2xs, 7600, 7600xsv and 8000 Glass Helm series without ever touching the crystal clear glass display. Rotary knob and joystick enable you to easily navigate thru menus and screens on any number of networked displays.
The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.
Simnet to Micro-C (male) cable used to connect Simnet to NMEA 2000 backbone, .5 meter in length.
The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. The NGX-1-ISO is equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 400mm.
Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm
Raymarine SeaTalkNG T-piece connector.
The Raymarine SeaTalk NG Starter Kit includes all the pieces necessary to create a SeaTalk NG network on your boat.
NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.
Garmin's Card Reader provides 2 SD Card slots to add maps such as Bluechart, Bluechart G3 Vision or Lake Mapping to your GPSMAP 8000 and 8200 MFD's, 8500 Series Black Box and 8600 Series MFD's. Magnetic, Waterproof housing allows the unit to be mounted either horizontally or vertically. Easy connect via Garmin network cable.
Order Now and Get Free UPS Ground Shipping!
Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.
The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.
Furuno NavNet Hub Adapter Cable, 6P(M) - RJ45(M), 0.5 Meters
Furuno NMEA Cable, 1 x 7 Pin Connector, 5 Meters
Furuno NMEA Cable, 1 x 6 Pin Connector, 5 Meters.
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
This Furuno Cable will allow you to connect two network units together or connect to a network hub. 2M total length with RJ45 connectors on both ends.
This Furuno Cable will allow you to connect a NavNet compatible devices to a network hub. 0.5M total length with a 6 Pin to RJ45 connectors on each end.
Raymarine SeaTalk HS Dual End Weatherproof Network Cable 1.5M
Furuno Power Data Cable for FCV 600L, FCV 582L, and 7000
Raymarine Seatalk High Speed 1.5m Cable
Raymarine Seatalk High Speed 5 Meter Cable
Raymarine RayNet to SeaTalk HS Network Cable 1 Meter
Raymarine RayNet to SeaTalk HS Network Cable 10 Meter
The Raymarine SeaTalk NG Cable Kit comes with all of the parts you need to start a Seatlk NG Network.
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
Raymarine 3M SeaTalk Interconnect Cable
The Lowrance 25ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Female Adapter Cable
Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 1 Meter.
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 3 Meter.
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 5 Meter.
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 20 Meter.
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 9 Meter.
Network two Raynet devices together with the Female/Female Cable. Length 2M
Network two Raynet devices together with the Female/Female Cable. Length 10M
