Mounts & Brackets

If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Active Phone charger is a must have*. Not only will you be able to secure your phone easily with one hand but you will also not have wires hanging around to catch on things. This 10W charger is up to 60% faster than previous models, even in high temperatures!

Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.

Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios

If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models! 

Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.

Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios

Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.

Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs. 

Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.

Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.

Garmin Heavy Duty Transom Mount with Spray Shield

Shakespeare 4365 4" SS GPS antenna mount

Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Looking for a replacement or additional mount for your 4" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with Garmin echoMAP 43/44dv, echoMAP CHIRP 42/43/44/45dv and echoMAP Plus 42/43/44/45cv models.

The Seaview Mast Mount provides a very sturdy platform for your compatible radar.

Shakespeare 4700 6-Inch SS Extension

The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.

Seaview Modular Plate for Dome Radars provides you with a plate to mount your radar onto. The Seaview plate is designed to be mounted to a Seaview Base Mount.

The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount

Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.

Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas

Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)

Second Mounting Station for Garmin GPSMAP 7X1/7X1s and echoMap 70s Series. Bracket and Wiring harness included.

The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.

Garmin's In-Hull Transducer Mounting Kit is the perfect solution for Kayak Fisherman. Compatible with Garmins's HD-ID (77/200kHz) or GT20-TM(77/200kHz) Transducers (Sold Separately) this in-hull mount allows includes adhesive that attaches and conforms to the inside of the kayaks hull.

Furuno Display Mounting Knob - 2 pieces required.

Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.

Garmin Bail Mount and Knobs for GPSMAP 7408, 7408xsv, 7608 and 7608xsv.

Garmin Tilt/Swivel Mount for STRIKER 4 Series Fishfinders.

Flush Mount Kit for STRIKER PLUS 9sv.

The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.

The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.

Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.

The Seaview Modular Plate for Dome Radars in Black provides you with sturdy base on which to mount your radar. The Seaview plate is designed to be mounted to a Seaview Base Mount.

Furuno mounting bracket for TZT3 16" displays. Includes bracket mount and knobs.

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 7-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.

Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!

Mount your compatible 1kW transom mount transducer with the transom mount bracket kit. This high performance bracket is compatible with the Airmar TM258, TM260, TM265, TM270W and TM275C housings.

Shakespeare 4700-1 12 inch SS Extension

Flush Mount Kit for Garmin 400 Series.

Furuno Display Mounting Knob - 2 pieces required

Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.

Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs

Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.

Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.

Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.