Simrad Accessories

Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs. 

Protect your Simrad GO9XSE display from scratches and sun when not in use!

The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

Simrad NSE/NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.

The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.

The Navico XSONIC Transducer Adapter Cable Connects 7 pin blue plug transducers to the 9 pin XSONIC black sockets on select Lowrance and Simrad displays.

Protect your Lowrance HDS 12 LIVE when not in use! 

The Lowrance 25ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

10' Transducer Extension Cable for  X Sonic transducers, LSS1, LSS2 Structure Scan, TotalScan and 3-in-1 Transducers.

NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.

Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.

Replacement Speed Wheel for P66 Transducers.

The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.

The Lowrance S3100 and Active Imaging HD 3-in-1 Transducer bundle includes the standard S3100 sonar module and the Navico Active Imaging HD 3-in-1 Transducer.
Instant Savings with Value Bundle!

Featuring 5 ethernet ports and a simple plug-and-play installation, it's easier than ever to share information across your Lowrance, Simrad or B&G network. Support for up to 1 gigabit high speed data transfer means you can expect smooth network performance across your boat’s system. Compact in design, the NEP-3 is ideal for installation in tight spaces.

The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

20' Transducer Extension compatiable with all Lowrance and Simrad units with Blue Connector.

Simrad 13' Female Micro-C NMEA 2000 Connector to Simnet Connector.

Simnet to Micro-C (male) cable used to connect Simnet to NMEA 2000 backbone, .5 meter in length.

Navico 10-Foot 12-PIN Transducer Extension cable for StructureScan 3D Module and 3D Bundles. Includes 2 10' (3M) cables.

Simrad's OP50 Wired Remote for NSS Evo2, NSO Evo2 and NSS Evo3 MFD'S. The OP50 Portrait has multiple mounting options and includes a single control rotary dial and dedicated keys for MOB, Autopilot Engage/Standby, Home, Menu, Window, Mark/GoTo, Exit and Power.

Protect your Simrad RS20 VHF Radio from the elements with the 000-14055-001 Suncover.

Simrad's OP12 wired remote provides simple integration with Simrad autopilot systems to provide mode control, course adjustments, and power steering. The OP 12 remote can be combined with the IS42 Color Instrument Display as a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.

Navico SS75 600W medium frequency CHIRP transducer, 9-Pin XSONIC, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

Navico's Precision-9 Compass provides heading and rate-of-turn information to Simrad, B&G and Lowrance autopilot, radar and navigation systems. NMEA2000 Connectivity.

Protect your Simrad NSS12 Evo3 and Evo3S displays from scratches and sun when not in use!

Use this wire block to adapt your bare wire transducer to a 9-Pin X-Sonic connector.

Protect your Simrad Cruise 7 from the elements! Simrad protective cover for Simrad Cruise 7-inch displays.

Protect your Simrad Cruise 9 from the elements! Simrad protective cover for Simrad Cruise 9-inch displays.

Protect your Simrad Cruise 5 from the elements! Simrad protective cover for Simrad Cruise 5-inch displays.

The Navico NMEA 2000 Remote Button is an easy to install button allowing for convenient placement for an emergency Man-Overboard (MOB) button. This button can trigger alerts across a NMEA 2000 system and devices.
See device compatibility below.

The Navico NMEA 0183 Interface provides a bi-directional gateway between a NMEA 2000 network and NMEA 0183 devices. This cable provides an ideal solution for those wanting to upgrade to newer technology, sensors and devices without replacing a whole system.

The Simrad RF25N rudder feedback is a medium duty rudder feedback that translates the angular travel of the rudder to a connected NMEA 2000 device. The RF25N connects via NMEA 2000 and features an attached 5.5m cable.

The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.

Navico's emergency Man-Over-Board (MOB) button is simple to install and connects to your compatible device via NMEA2000. By simply pressing the button, a MOB waypoint will automatically be created and provide navigation data to reach the MOB position.

The Simrad FreeSteer Remote provides full 360 precision steering of your Simrad Saltwater Recon Trolling Motor. The FreeSteer's revolutionary positional control has unique jogging abilities. Execute diagonal jogs in 8 directions with ease! Move anchor positions freely without having to re-anchor your boat.

The Navico Hydraulic RAM T1 12V combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. The T1 12V provides maximum power with minimum consumption. This is a fully integrated hydraulic system with no external hoses or reservoirs.

The Navico Hydraulic RAM T3 12V combines a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation. The T3 drive has a separate hydraulic pump to allow for greater mounting flexibility on this larger cylinder.

The Navico Ethernet Adapter Cable Green M12M 8-pin - Yellow 5-pin female (1.2 ft) works to adapt yellow ended ethernet cables to the NEP-3 port expander.

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 1.8m (6ft).

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 15m (49.2ft).

The Navico Ethernet Extension cable measures 6ft (1.2m) and is designed for M12-toM12 connections. Compatible with Lowrance, Simrad and B&G.

The Navico Ethernet Extension cable measures 16.5ft (5m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.

The Navico Ethernet Extension cable measures 49.2ft (15m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.