Free 2-Day Air on Thousands of Items!
The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).
The Lowrance HDI 83/200 & 455/800khz Skimmer Transducer.
The Lowrance Hook2 Power Cable is compatible with all Hook 2 5", 7", 9", 12" units and HOOK Reveal series.
The Navico Ethernet Adapter Cable Green M12M 8-pin - Yellow 5-pin female (1.2 ft) works to adapt yellow ended ethernet cables to the NEP-3 port expander.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.
The Lowrance 106-72, HST-WSBL, is a 83/200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable.
The Lowrance 25ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Lowrance Sonar Adapter Cable, 9-Pin Mini to 9-Pin. Required for use with Lowrance and Simrad Recon Saltwater Trolling Motors.
The Lowrance Transom Mount Skimmer Transducer, HST-DFSBL has a sleek design for better water flow which leads to more accurate depth readings. 50/200khz Dual Frequency. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)
Protect your Lowrance 5-inch Eagle display from the elements with the Lowrance protective cover!
The Lowrance Eagle SplitShot transducer is designed exclusively for the Lowrance Eagle series and provides wide-angle high CHIRP and DownScan imaging. FishReveal technology provides unparalleled target separation and identification!
The Lowrance Eagle TripleShot transducer is designed exclusively for the Lowrance Eagle series and provides CHIRP, DownScan and SideScan imaging. DownScan FishReveal technology provides unparalleled target separation and identification!
Lowrance P79 Plastic In-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The in-hull transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees. 50/200khz Transducer.
Lowrance HDS / Elite and Hook HDI Series Power/Data Cable.
for all HDS / Elite-TI / Elite HDI / Hook HDI series units
The Navico XSONIC Transducer Adapter Cable Connects 7 pin blue plug transducers to the 9 pin XSONIC black sockets on select Lowrance and Simrad displays.
Protect your Lowrance HDS 9 LIVE display from scratches and sun when not in use!
Protect your Lowrance 7-inch Eagle display from the elements with the Lowrance protective cover!
Protect your Lowrance 9-inch Eagle display from the elements with the Lowrance protective cover!
The Lowrance Eagle Power Cable is compatible with 5"/7"/9" Eagle and Eagle Eye Displays. Includes Twist Lock Connector.
The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Lowrance Power Cord for Elite 5M (non-HD)
The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.
The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.
The Active Imaging HD 3-in-1 Transducer provides high-definition views of CHIRP, SideScan and DownScan Imaging with increased clarity! Compatible as a direct connection with the Lowrance HDS PRO series. Compatible with HDS LIVE, HDS Carbon, Elite FS and Simrad NSSevo3S, NSS evo3, NSS 4 GPS / Fishfinder Units and GO series displays with the addition of an S3100 module (Sold Separately).
Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!
Featuring 5 ethernet ports and a simple plug-and-play installation, it's easier than ever to share information across your Lowrance, Simrad or B&G network. Support for up to 1 gigabit high speed data transfer means you can expect smooth network performance across your boat’s system. Compact in design, the NEP-3 is ideal for installation in tight spaces.
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
If you are mounting a Lowrance HDS or Elite-7 under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
Provide Protection for your Lowrance Elite 4x, Elite 4, Mark 4 or Hook 4 and 4x GPS/Fishfinder with this Suncover. *Compatible with HDI Series of units only.
Protect your Lowrance HOOK2 and HOOK Reveal 5" Display from the elements with this Sun Cover. Compatible with 5" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 5" Displays.
Protect your Lowrance HOOK2 9" and HOOK Reveal 9" Display from the elements with this Sun Cover. Compatible with 9" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 9" Displays.
Lowrance Gimbal bracket for All HOOK2 and HOOK Reveal 9" Units. Includes Knobs.
Lowrance 10' Transducer Extension for Hook2 SplitShot and TripleShot Transducers. Compatible with Lowrance Hook2/Hook Reveal 5", 7" and 9" Splitshot and TripleShot GPS / Fishfinders as well as 5", 7" and 9" Simrad Cruise Units.
Lowrance 7 Pin Transducer to Hook2 and Reveal Fishfinder Adapter Cable.
The Navico NMEA 0183 Interface provides a bi-directional gateway between a NMEA 2000 network and NMEA 0183 devices. This cable provides an ideal solution for those wanting to upgrade to newer technology, sensors and devices without replacing a whole system.
The Lowrance Active Imaging HD Fishreveal transducer provides Lowrance High/Wide CHIRP, SideScan and DownScan imagery. Enjoy Lowrance FishReveal DownScan and SideScan when paired with an S3100 sonar module, sold separately.
The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.
Protect your Lowrance Eagle 4x Fishfinder from the elements with the Lowrance protective cover!
Featuring a detachable and programmable lower keypad, the Advanced Wireless Trolling Motor Foot Pedal allows for convenient and intuitive control of your Recon Trolling Motor.
This single, easy-to-install transducer provides fish-finding and structure imaging to your Recon Trolling Motor. Powerful sonar including CHIRP, SideScan and DownScan imaging all come together to provide highly detailed sonar imagery!
Directly Compatible with Freshwater Recon Trolling Motors.
Not Compatible with GHOST Trolling Motors.
Compatible with Saltwater Recon Trolling Motors, Requires 000-15327-001 Adapter Cable
The Lowrance Weedless Prop is compatible with Freshwater and Saltwater Recon Trolling Motors.
Not Compatible with Ghost Trolling Motors.
The ActiveTarget 2 XL Trolling Motor Shaft Mount is designed for Ghost and Ghost X trolling motors and fits round shafts from 27–33 mm. It features a cam-lock clamp for quick installation and allows easy switching between Forward XL, Down XL, and Scout XL views with clear alignment indicators for precise positioning.
Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)
