Free 2-Day Shipping on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Active Phone charger is a must have*. Not only will you be able to secure your phone easily with one hand but you will also not have wires hanging around to catch on things. This 10W charger is up to 60% faster than previous models, even in high temperatures!
The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.
Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 3 feet long (1 meter).
Garmin Marine Network Cable (20').
Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.
PropSpeed's FoulFree Transducer Coating Kit is the biggest advancement in transducer paint and coatings in the last 30 years. It will keep your thru-hull or transom mount transducer free of marine growth. This nontoxic formula has zero leaching of harmful chemicals into water unlike traditional anti-fouling bottom paints and is certified by Airmar.
Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.
Certified Refurbished Special!
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).
ACR HemiLight 3 high intensity flashing PFD light.
Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units
The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.
Protect your Lowrance 9-inch Eagle display from the elements with the Lowrance protective cover!
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.
Allowing you to Surface Mount your Garmin ECHOMAP Ultra 12" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.
Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.
Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units
The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.
Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.
Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv, 922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243 and 1243xsv.
Looking for a replacement or secondary cradle for your HX890? The Standard Horizon SBH-32 is the exact charging cradle that came with your HX890. (Charging requires 12v or 110v. cable that came with your unit or can be purchased separately below)
The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Standard Horizon MH-73A4B Submersible Speaker Mic for Standard Horizon HX40, HX210, HX380, HX400, HX870 and HX890.
Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, and GPSMAP 1242xsv Chartplotter Fishfinders.
The ACR 3963.1 C-Light is a Rugged, Lightweight Manually Activated, Steady On Personal Distress Light. Small in Size, the 3963.1 can easily fit in your pocket or attach to a life jacket or backpack. Operating Life of over 30 hours!
Buy More and Save, Order 6 or more and save 15%.
Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.
Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.
Protect your Lowrance HOOK2 9" and HOOK Reveal 9" Display from the elements with this Sun Cover. Compatible with 9" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 9" Displays.
The SAD-25B is the replacement charging cable for the Standard Horizon HX400, HX400IS, HX870, HX890, HX40 and HX210 radios. The SAD-25B requires the use of the SBH-25, SBH-32 or SBH-36 Cradle (not included and sold separately).
Garmin Protective Cover for echoMap Plus and UHD 72cv/sv, 73cv/sv, 74cv/sv and 75cv/sv units.
The Garmin instrument display protective cover shields your Garmin instrument display from the elements. Compatible with GHC 20, GMI 20, GNX 20, GNX 21 and GNX Wind Displays.
The Airmar Crows Foot Wrench is designed to facilitate installation of compatible transducers by holding the transducer in place while the nut is being tightened. The Crows Foot Wrench is compatible with B164/SS164 and B175/SS175 transducers.
Standard Horizon Dust Cover for GX1400, GX1410, GX1300, GX1200 as well as the 1150/1100/1000S
Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.
Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.
The Standard Horizon SSM-70H Wired RAM4 Mic controls all Radio and DSC Functions of the Standard Horizon GX6000/GX2400/GX1800/GX1800G/GX1850/GX1850G Series VHF Radios. Includes 23' Cable
The Standard Horizon SCU-31 is a NMEA 0183 Smart Antenna that provides rapid acquisition time and NMEA output.
