Transducers

Garmin's GT56UHD-TM Transducer pairs with specific Garmin units to provide exceptional Ultra High Definition images of fish and structure below and to the left and right of your vessel! The GT56 provides accurate depth and water temperature readings.

Navico's active imaging 3 in 1 transducer pairs with Lowrance HDS LIVE, HDS Carbon and Elite Ti2 displays as well as Simrad GO and NSS Evo3 units and offers M/H CHIRP, DownScan and Sidescan with temperature readings.

Garmin GT51M-TM 12-Pin 600W CHIRP (Mid-Band CHIRP 80-160kHz) and 500W (CHIRP 260/455kHz) ClearVu/SideVu Transom Mount Transducer. Built-In Temperature Sensor. Compatible with Garmin GPSMAP 7600xsv Series and GSD25.

All in One HD-ID 500W (77/200kHz) and 500W (455/800kHz) ClearVu Transom Mount Transducer with a 4-Pin connector. Compatible with Garmin echo dv/cv Fishfinder Series. Replaces Garmin 010-12758-00.

Garmin’s Livescope Plus offers real time views of fish and structure below your boat! 35% improved target separation, better resolution, reduced noise and clearer images are just a few of the benefits of the Livescope Plus. Includes GLS 10 Box and LVS34 Transducer along with 3 mounting options including the perspective mode mount!

Garmin GT8HW-IH In Hull CHIRP Transducer is designed to be mounted inside the hull of your boat. This 250 Watt Transducer can reach maximum depths of up to 800'. Transducer comes with 20' transducer cable with Garmin 8-pin connector.
Designed for boats with less than a 6° deadrise

Garmin's GT52HW-TM Transducer provides depth and temperature readings. Perfect for Freshwater fishing or shallow saltwater fishing the GT52HW includes CHIRP Traditional Sonar and CHIRP ClearVu and CHIRP SideVu for near photolike images below and to the left and right of your boat while consistently displaying crisp clear fish arches and enhanced target separation.

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

Garmin's GT15M-IH In-Hull Mid-band CHIRP Transducer provides accurate depth readings and is compatible with Garmin STRIKER, echoMAP CHIRP, echoMAP Plus, echoMAP UHD, GPSMAP chartplotter/sonar combination units and GSD25.

Lowrance's TripleShot transducer pairs with HOOK2 Fishfinder and combination GPS/Fishfinders providing underwater sonar images to depths of 500' as well as photo-like images below the boat (DownScan) to 300' and photo-like images to the left and right of the boat(SideScan) to 600' (side to side). Provides Depth and Temp Readings.

Garmin's GT24UHD-TM Transducer pairs with your Garmin GPSMAP 8400/8600xsv series and echoMAP Ultra GPS/Fishfinder to provide exceptional High Definition images of fish and structure below your vessel! The GT24 also provides accurate water temperatures.

The Garmin GT12M-THF is a flush mount thru hull transducer with a 12-degree tilt, suitable for vessels with a deadrise of 8-15 degrees. The GT12M-THF is ideal for midsize fishing and cruising boats and features 350W mid-band CHIRP sonar.

The Garmin Transom Mount Dual Frequency 50/200khz Transducer provides accurate depth and temp readings to your GSD 20/21/22, Garmin Chartplotter/Sounder or Garmin Fishfinder.
(Depth/Temp)

Furuno 525TLTD20, B60-20 Low Profile Bronze Thru-Hull Transducer with 20 degree tilted element and temp. Designed to works on boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Furuno 526TID-HDN 1kW Bronze Thru-Hull Transducer with High Speed Fairing Block is a must have for any serious recreational or commercial fisherman. Broadband Technology provides excellent fishfinding and detection.
(Depth/Temp) Bare Ends

Raymarine P79 Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The in-hull transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees.

The Lowrance HDI 83/200 & 455/800khz Skimmer Transducer.

Furuno 300W Plastic Transom Mount CHIRP Transducer. Medium Frequency, Depth and Temp.

Furuno TM185HW High Frequency Wide Cone Angle Plastic Transom Mount CHIRP 1000 Watt Transducer is perfect for outboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Depth and Temp.

Pair the HV-100+ Transom Mount transducer with your Raymarine element for excellent underwater images and water temperature. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat! 

The Navico plastic replacement bracket for StructureScan 3D and TotalScan transducers allow for mounting directly to the transom, on the jackplate or under the step.

The Lowrance ActiveTarget 2 Live Sonar System provides crystal clear live-action sonar imagery with optimized image and stabilization settings. Enhanced beams show more detailed, smoother images. Live views include Forward, Down and Scout modes- allowing for the ultimate in real-time sonar!
Compatible Display Required, Sold Separately.

The Furuno 225T-TM904 Transom Mount Transducer provides Side-Scan functionality to your Furuno TZTouch3 12-, 16- or 19-inch display. Furuno CHIRP Side-Scan provides images of structure offshore, inshore and along coastlines to enhance your fishing experience!
Order Now Through December 31, 2024 and Receive a $200 Rebate from Furuno! Click here to View Rebate Details.

Airmar B175 1kW medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 9-Pin Navico XSONIC Mix and Match Cable Included.

The Lowrance S3100 and Active Imaging HD 3-in-1 Fish Reveal M/H Bundle includes the standard S3100 Sonar Module and Active Imaging HD 3-in-1 Fish Reveal Medium/High Transducer. This bundle includes the equipment needed to provide High/Wide CHIRP, SideScan HD, DownScan HD, FishReveal DownScan and FishReveal SideScan to your compatible display.
Compatible display required, sold separately.

The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

Airmar B60 600W traditional dual frequency transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 8-Pin Garmin Mix and Match Cable Included.

The Airmar B275C-LHW-MM CHIRP Transducer is ideal in shallow to deep water applications. With its Wide Beam Angle the B275 provides 2x the coverage under the boat when compared with the other CHIRP transducers on the market today. (Low and High Frequencies, Depth and Temp). Connector: Airmar 12-Pin (MMC).
Mix and Match cable NOT included.

The Furuno Transom Mount Dual Frequency Transducer provides accurate depth, speed and temp readings for Furuno fishfinders and sounder modules. 600 Watts and 50/200khz frequencies.(Depth/Speed/Temp).

Furuno 526TID-HDD 1kW Bronze Thru-Hull Transducer with High Speed Fairing Block is a must have for any serious recreational or commercial fisherman. Broadband Technology provides excellent fishfinding and detection. 10-Pin connector for Furuno.
(Depth/Temp).

The Furuno B164 20 1kw Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element is perfect for trailered boats with deadrise between 16 to 24 degrees. Includes temperature and does not need Fairing Block.
(Depth/Temp)

Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)

The Raymarine E66085, B60 20 Bronze Low Profile Thruhull Transducer with 20 degree tilted element and temp is designed to work on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. (Depth/Temp).

The Lowrance Transom Mount Skimmer Transducer, HST-DFSBL has a sleek design for better water flow which leads to more accurate depth readings. 50/200khz Dual Frequency. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)

The Raymarine Transom Mount Transducer for Clearpulse sonar provides accurate Depth, Speed and Temperature to your Raymarine Sounder. The P58 style transducer allows for clean water flow across the surface of the transducer for better readings.

The Raymarine E66087, B60 20 Bronze Low Profile Thruhull Transducer with 20 degree tilted element and temp is designed to work on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. (Depth/Temp)

The Lowrance 106-72, HST-WSBL, is a 83/200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable.

The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).

The Garmin 8 Pin B117 600W Bronze Low Profile Thru-Hull Transducer works on boats with up to 7 degree deadrise for GSD 24. Includes temp and does not need Fairing Block. Garmin part# 010-10182-21.
(Depth/Temp)

Garmin 010-10982-21, 8 Pin B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element and temp is designed to work on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block.
(Depth/Temp)

Garmin 010-10982-20, 8 Pin B60-20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Designed for boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

The Garmin B744 V 8 Pin Bronze Thruhull Transducer for GSD 24, Garmin Chartplotter/Sounder or Garmin Fishfinder with fairing block operates at 50/200KHZ and provides accurate Depth, Speed and Temperature readings.
(Depth/Speed/Temp)

Lowrance Dual Frequency 455/800 kHz DSI Transducer With Temperature. Compatible with Lowrance DSI Units only. Includes 20 ft cable, mounting bracket and hardware.

Garmin B175 1kW low frequency CHIRP transducer, 8-pin, low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Garmin Low Profile 20 degree tilt 1kW Low Frequency CHIRP transducer.

This NMEA 2000 P79 In Hull (up to 22 degree deadrise) smart sensor provides digital depth to any existing NMEA 2000 network. The P79 includes a 6 Meter NMEA 2000 cable and NMEA 2000 T Connector.