Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
Category
Mounts & Brackets
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Active Phone charger is a must have. Not only will you be able to secure your phone easily with one hand but you will also not have wires hanging around to catch on things. This 10W charger is up to 60% faster than previous models, even in high temperatures!
Shipping!
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
Shipping!
Garmin Heavy Duty Transom Mount with Spray Shield
Garmin Tilt/Swivel Mount for STRIKER 5dv, 5cv, 7dv, STRIKER Plus 5cv,7cv/7sv Fishfinders as well as ECHOMAP UHD2 5-Inch 'cv' and 7-Inch 'cv' GPS/ Fishfinders. Includes knobs.
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios
Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.
The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Shipping!
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
Expected 3/28/2023
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
Expected 3/28/2023
Shipping!
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
in 3-5 Days
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays and HOOK Reveal 5" Displays.
in 3-5 Days
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
Shipping!
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays.
in 3-5 Days
Garmin Tilt/Swivel Mount for STRIKER 4 Series Fishfinders.
Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.
The Shakespeare 3187 Stainless Steel Ratchet Mount is a versatile mount with a four-way ratchet design. Designed for both vertical or horizontal mounting in mind! The 3187 mount fits standard 1"- 14 threads and features a cable slot for easy installation.
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
in 3-5 Days
Second Mounting Station for Garmin GPSMAP 7X1/7X1s and echoMap 70s Series. Bracket and Wiring harness included.
in 3-5 Days
Garmin Trolling Motor Mount for 4 and 8 Pin Transducers.
in 3-5 Days
The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.
in 3-5 Days
Looking for a second Bail Mount for your 7" or 9" Garmin echoMap DV or SV model? Garmin's 010-12233-03 Bail Mount with Knobs is the exact Mount that came with your echoMap 7XDV, 7XSV and 9XSV Model. Includes quick cable disconnect feature allowing you to plug all necessary cords into the bracket for easy removal and re-install of your unit.
Flush Mount your 5" echoMAP / echoMAP CHIRP unit with Garmin's Flush Mount Kit. Kit includes hardware, installation instructions and a template. Compatible with Garmin echoMAP 5xdv and echoMAP CHIRP 5xdv units.
in 3-5 Days
The Seaview Mast Mount provides a very sturdy platform for your compatible radar.
Shipping!
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below. Both radar plate and base are in black color.
*Aft Raked Mount
Expected 3/28/2023
Shipping!
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus using this Garmin adapter plate.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
Shipping!
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: White.
Expected 4/19/2023
Shipping!
Flush Mount Kit for Garmin 400 Series.
in 3-5 Days
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
Furuno Display Mounting Knob - 2 pieces required
in 3-5 Days
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
in 3-5 Days
Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.
in 3-5 Days
Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.
in 3-5 Days
Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.
Flush Mount Kit for Garmin GPSMAP 7x1 / 7x1xs & echoMap 70 Series.
in 3-5 Days
Garmin Flat Mount kit for echoMap 70 series and GPSMAP 7x1 / 7x1s series. Give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
in 3-5 Days
Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.
in 3-5 Days
The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.
in 3-5 Days
Garmin's In-Hull Transducer Mounting Kit is the perfect solution for Kayak Fisherman. Compatible with Garmins's HD-ID (77/200kHz) or GT20-TM(77/200kHz) Transducers (Sold Separately) this in-hull mount allows includes adhesive that attaches and conforms to the inside of the kayaks hull.
Furuno Display Mounting Knob - 2 pieces required.
in 3-5 Days
Furuno's TZTL15F Bracket Mount and Knobs. Mount your TZTouch 2 15" display to a flat surface with this bracket with adjustable angle for optimum viewing.
in 3-5 Days
Shipping!
Furuno's TZTL12F Bracket Mount and Knobs. Mount your TZTouch 2 12" display to a flat surface with this bracket with adjustable angle for optimum viewing.
Shipping!
Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.
in 3-5 Days
Garmin Flush Mount for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.
in 3-5 Days