Lowrance Accessories

The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).

Protect your Lowrance 9-inch Eagle display from the elements with the Lowrance protective cover!

Protect your Lowrance HOOK2 9" and HOOK Reveal 9" Display from the elements with this Sun Cover. Compatible with 9" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 9" Displays.

Protect your Lowrance Elite 9 FS display from scratches and sun when not in use!

Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)

10' Transducer Extension Cable for  X Sonic transducers, LSS1, LSS2 Structure Scan, TotalScan and 3-in-1 Transducers.

Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.

The Lowrance HDI 83/200 & 455/800khz Skimmer Transducer.

The Navico XSONIC Transducer Adapter Cable Connects 7 pin blue plug transducers to the 9 pin XSONIC black sockets on select Lowrance and Simrad displays.

Protect your Lowrance HOOK2 or HOOK Reveal 7" Display from the elements with this Sun Cover. Compatible with 7" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 7" displays.

The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.

This single, easy-to-install transducer provides fish-finding and structure imaging to your Recon Freshwater Trolling Motor. Powerful sonar including CHIRP, SideScan and DownScan imaging all come together to provide highly detailed sonar imagery!
Compatible with Freshwater Recon Trolling Motors Only. Not Compatible with GHOST Trolling Motors.

The Lowrance 106-72, HST-WSBL, is a 83/200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable.

Lowrance Power Cord for Elite 5M (non-HD)

The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.

If you are mounting a Lowrance HDS or Elite-7 under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.

NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.

The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.

Protect your Lowrance Link-6 VHF Marine Radio with the 000-14054-001 Suncover.

The Lowrance Hook2 Power Cable is compatible with all Hook 2 5", 7", 9", 12" units and HOOK Reveal series.

Lowrance 10' Transducer Extension for Hook2 SplitShot and TripleShot Transducers. Compatible with Lowrance Hook2/Hook Reveal 5", 7" and 9" Splitshot and TripleShot GPS / Fishfinders as well as 5", 7" and 9" Simrad Cruise Units.

Protect your Lowrance HDS 9 LIVE display from scratches and sun when not in use!

The Active Imaging HD 3-in-1 Transducer provides high-definition views of CHIRP, SideScan and DownScan Imaging with increased clarity! Compatible as a direct connection with the Lowrance HDS PRO series. Compatible with HDS LIVE, HDS Carbon, Elite FS and Simrad NSSevo3S, NSS evo3 and GO series displays with the addition of an S3100 module (Sold Separately).

Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!

Control autopilot, anchor, cruise control, drop a waypoint and control prop on/off features with the Lowrance Compact GPS Remote for trolling motors. This easy-to-wear remote is lightweight features an ergonomic design. Compatible with Lowrance and Simrad Recon Trolling Motors.

The Lowrance Transom Mount Skimmer Transducer, HST-DFSBL has a sleek design for better water flow which leads to more accurate depth readings. 50/200khz Dual Frequency. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)

The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

20' Transducer Extension compatiable with all Lowrance and Simrad units with Blue Connector.

Display cover for HDS5 Chartplotter & Chartplotter/Fishfinder units.

Lowrance HDS / Elite and Hook HDI Series Power/Data Cable.
for all HDS / Elite-TI / Elite HDI / Hook HDI series units

Lowrance Flush Mount kit for Lowrance Elite and Hook 7 Series GPS and Fishfinders.

Protect your Lowrance HOOK2 and HOOK Reveal 5" Display from the elements with this Sun Cover. Compatible with 5" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 5" Displays.

Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.

Use this wire block to adapt your bare wire transducer to a 9-Pin X-Sonic connector.

Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models

The Navico NMEA 0183 Interface provides a bi-directional gateway between a NMEA 2000 network and NMEA 0183 devices. This cable provides an ideal solution for those wanting to upgrade to newer technology, sensors and devices without replacing a whole system.

The Lowrance Active Imaging HD Fishreveal transducer provides Lowrance High/Wide CHIRP, SideScan and DownScan imagery. Enjoy Lowrance FishReveal DownScan and SideScan when paired with an S3100 sonar module, sold separately.

The Lowrance Active Imaging HD transducer provides Lowrance High/Medium CHIRP, SideScan and DownScan imagery. Enjoy Lowrance FishReveal DownScan and SideScan when paired with an S3100 sonar module, sold separately.

The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.

Protect your Lowrance 5-inch Eagle display from the elements with the Lowrance protective cover!

Protect your Lowrance 7-inch Eagle display from the elements with the Lowrance protective cover!

The Lowrance FreeSteer Remote provides full 360 precision steering of your Lowrance Recon Trolling Motor. The FreeSteer's revolutionary positional control has unique jogging abilities. Execute diagonal jogs in 8 directions with ease! Move anchor positions freely without having to re-anchor your boat.

Featuring a detachable and programmable lower keypad, the Advanced Wireless Trolling Motor Foot Pedal allows for convenient and intuitive control of your Recon Trolling Motor.

The Lowrance Eagle Power Cable is compatible with 5"/7"/9" Eagle and Eagle Eye Displays.

Featuring 5 ethernet ports and a simple plug-and-play installation, it's easier than ever to share information across your Lowrance, Simrad or B&G network. Support for up to 1 gigabit high speed data transfer means you can expect smooth network performance across your boat’s system. Compact in design, the NEP-3 is ideal for installation in tight spaces.

The Navico Ethernet Adapter Cable Green M12M 8-pin - Yellow 5-pin female (1.2 ft) works to adapt yellow ended ethernet cables to the NEP-3 port expander.

The Navico Ethernet Extension cable measures 6ft (1.2m) and is designed for M12-toM12 connections. Compatible with Lowrance, Simrad and B&G.