Airmar Transducers

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

Airmar 600W Transom Mount High Wide Frequency CHIRP transducer. 9-Pin Navico XSONIC Mix and Match Cable Included. Compatible with Lowrance or Simrad Fishfinders with 9-pin XSONIC Connector.

The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

Airmar B175 1kW medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 12-Pin Garmin Mix and Match Cable Included.

The Airmar R599LM is a 2-3kW low to medium frequency transducer delivering deep water performance down to 10,000'. The R599LM is an in-hull design and includes a tank which is cut to the boat's deadrise post purchase and affixed inside the hull.

Airmar B175 1kW medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 9-Pin Navico XSONIC Mix and Match Cable Included.

Airmar Low Profile 20 degree tilt Medium Frequency CHIRP transducer. No Connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 

Furuno B175 1kW high-wide frequency CHIRP transducer, with 10-pin Furuno plug. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

Airmar P79 600W Plastic Dual Frequency In Hull Transducer. 6-Pin Garmin Mix and Match Cable Included.

Airmar B60 600W traditional dual frequency transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 8-Pin Garmin Mix and Match Cable Included.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 10-Pin Low Frequency Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 10-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 12-pin plug on the other side. 

Airmar TM185 1kW medium frequency CHIRP transducer, Transom Mount. 9-Pin Navico XSONIC Mix and Match Cable Included.

The DT820 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

Airmar B175 1kW high-wide frequency CHIRP transducer, bare wire connection (adapter, wiring block required) Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

The DST810 is a Bronze thru-hull smart sensor that will provide digital depth (numbers only), speed and temp to any existing NMEA 2K network.

The R509C-LHW (Low, High Frequency, Wide Beam) CHIRP 3kW Thru-Hull Transducer is designed for ultimate performance. The sheer size of the R509 gives you an idea of what size boat it is designed for, recommended for vessels 40' and up. Comes with high-performance fairing block.

Airmar B175 1kW high-wide frequency CHIRP transducer, Garmin 8-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

The Airmar DT800 is a thru hull smart sensor that connects to a NMEA 2000 network to provide numerical depth and temperature readings. This low-profile, retractable thru hill sensor operates on 235kHz frequency to prevent interference with other echosounders on the boat. Suitable for vessels with a deadrise 0-7 degrees. 

The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) - 12-Pin Garmin Mix and Match Cable Included.

Airmar B175 1kW low frequency CHIRP transducer, 9-Pin XSONIC Mix and Match Cable included. Suitable for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW low frequency CHIRP transducer, 12-Pin Garmin Mix and Match Cable included. Low profile, bronze thru-hull housing, Suitable for vessels with deadrises of 16-24 degrees. .

Airmar B60 600W traditional dual frequency transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 6-Pin Garmin Mix and Match Cable Included.

Extend your Garmin 6-pin transducer cable 20 feet with the Airmar Transducer Extension Cable.

Airmar B744V 600W traditional dual frequency transducer, thru-hull with Fairing Block. 6-Pin Garmin Mix and Match Cable Included.

Airmar P66 600W traditional dual frequency transducer, transom mount. 6-Pin Garmin Mix and Match Cable Included.

The Airmar R109LH is a 2kW thru hull transducer with fairing block that delivers Low/High CHIRP sonar and water temperature. The R109LH includes a 49' cable with bare wire connection. Suitable for deadrises up to 22-degrees.

Airmar TM260 1kW transducer, Transom Mount. 10-Pin Furuno Mix and Match Cable Included.

Airmar B175 1kW low frequency CHIRP transducer, bronze thru-hull housing for vessels with deadrises of 0-7-degrees. 8-Pin Garmin Mix and Match Cable Included.

The Airmar Mix & Match Cable for Navico XSONIC M/H CHIRP Transducers is 1m in length connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and your compatible Navico fishfinder's 9-Pin XSONIC connector on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Humminbird 14-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Humminbird 14-pin plug on the other side.

The DT812 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) No Connector, For Bare Wire Install.

The Airmar TM265C-LH Transom Mount Chirp Transducer operates over a broad range of frequencies to provide the user with high quality imaging. Compatible with Garmin GSD26, Furuno DFF1-UHD, Navico BSM-2 and Navico BSM-3.

The Airmar TM265C-LM Transom Mount Chirp Transducer operates over a broad range of frequencies to provide the user with high quality imaging. Compatible with Garmin GSD26, Raymarine C450 and Simrad BSM2.

This NMEA 2000 P79 In Hull (up to 22 degree deadrise) smart sensor provides digital depth to any existing NMEA 2000 network. The P79 includes a 6 Meter NMEA 2000 cable and NMEA 2000 T Connector.

The Airmar B275C-LH-W CHIRP Transducer is ideal in shallow to deep water applications. With its Wide Beam Angle the B275 provides 2x the coverage under the boat when compared with the other CHIRP transducers on the market today. (Low and High Frequencies, Depth and Temp) Comes with 12-Pin Connector for Garmin.

Airmar B175 1kW low frequency CHIRP transducer, Mix-and-Match End with no Mix-and-Match cable included. Can also be used for bare wire connection by cutting end and exposing wires. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW medium frequency CHIRP transducer, Mix-and-Match End with no Mix-and-Match cable included. Can also be used for bare wire connection by cutting end and exposing wires. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

The R509C-LH CHIRP Thru-Hull Transducer is designed for ultimate performance. The sheer size of the R509 gives you an idea of what size boat it is designed for, recommended for vessels 40' and up. Comes with high-performance fairing block.

The R409C-LWM CHIRP Thru-Hull Transducer is designed for ultimate performance. Recommended for vessels 40' and up, the tournament series 409 has an ultra wide beam for even more bottom coverage. Comes with high-performance fairing block.

Bronze Thru-Hull Water Temperature Sesnsor without connector. Provides water temperature to ±0.3°C (±0.17°F) precision. Temperature data is output to a chart plotter, radar screen, digital display or computer.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. 8-Pin Garmin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. 12-Pin Garmin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. Navico 9-Pin XSONIC Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.