Smart, Reliable Autopilot Control for Sailboats
The Garmin Reactor 40 Sail Corepack with SmartDrive and GHC 50 Display is a complete sailboat autopilot solution designed to provide reliable, precise steering control in a wide range of sailing conditions. The system combines Garmin’s Reactor 40 autopilot with the innovative SmartDrive brushless linear actuator and a dedicated GHC 50 touchscreen autopilot instrument.
The SmartDrive actuator features a built-in ECU and a contactless rudder position sensor, helping reduce mechanical wear while providing accurate rudder awareness. Its brushless design delivers up to 1,050 lbs. of maximum thrust, with adjustable maximum force output to accommodate different vessel requirements. The system is suitable for many sailboats and catamarans with displacement up to 33,000 lbs. and up to 45 feet in length.
The included GHC 50 provides a dedicated 5-inch touchscreen for intuitive autopilot operation. It can integrate with compatible Garmin marine electronics and networks, while NMEA 2000 connectivity allows the Reactor system to communicate with other compatible onboard equipment. Safely sail with confidence as this autopilot reacts to see conditions even when pitching and rolling automatically adjusting to sea conditions and ensuring a smooth transit through the water.
This SmartDrive sail autopilot fully supports 12/24 VDX operation giving the ability to suit a wide range of vessels. Keeping your Reactor 40 up to date virtually anywhere is easier than ever while this system supports software updates for the GHC50/Garmin MFD via the ActiveCaptain App.
When paired with a compatible Garmin gWind sensor, the Reactor 40 can support wind-angle holding, along with adjustable tack and gybe speeds and response settings. Control this Reactor series autopilot anywhere on board by using a compatible device like the Reactor autopilot remote and select Quatix smartwatches, and more. Adding the APK 10 autopilot keypad with rotary knob and tactile buttons gives mariners more price control over this Reactor 40 series system. This system is also designed with retrofit installations in mind, offering a similar form factor to other linear-drive systems.
Garmin Reactor 40 Sail Corepack with SmartDrive and GHC 50 Autopilot Instrument Box Contents
- Reactor CCU (course computer unit)
- SmartDrive actuator
- GHC 50 display
- Buzzer
- Power cables
- NMEA 2000 2 m backbone/drop cable
- NMEA 2000 T-connectors
- NMEA 2000 power cable
- NMEA 2000 terminators
- Mounting hardware
- Documentation
Garmin Reactor 40 Sail Corepack with SmartDrive and GHC 50 Autopilot Instrument Key Features
- Built in ECU
- Contactless rudder position sensor for superior reliability
- The brushless linear actuator is suitable for a wide range of sailboats and catamarans
- You can mount the Reactor 40 nearly anywhere, in any orientation.
- More accurate tack and gybe with adjustable speed, auto response and improved upwind hold
- SmartDrive Actuator Size: 4.5"W x 7.75"H x 27.6“D
Product Accessories for Garmin Reactor 40 Sail Corepack with SmartDrive and GHC 50 Autopilot Instrument
Our Price:$99.95
Garmin NMEA 2000 Starter Kit
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
Our Price:$68.95
Garmin NMEA 2000 Multiport T-Connector
Garmin NMEA 2000 Multiport T-Connector.
Garmin NMEA 2000 Backbone/Drop Cable 2 Meter
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Our Price:$29.95
Garmin NMEA 2000 Micro T-Connector
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Our Price:$54.95
Garmin 20' BlueNet Marine Network Cable
Network compatible Garmin devices with the 20 foot BlueNet Marine Network Cable.
Our Price:$29.95
Garmin NMEA 2000 Power Cable
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
Our Price:$37.95
Garmin 6' BlueNet Marine Network Cable
Network compatible Garmin devices with the 6 foot BlueNet Marine Network Cable.
Our Price:$24.95
Garmin 1 Foot Bluenet Network Cable
Garmin 1 Foot Bluenet Network Cable
Garmin NMEA 2000 Backbone Cable 6 Meter
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).
Our Price:$24.95
Garmin Cable Coupler for Garmin BlueNet Network
Garmin Cable Coupler for Garmin BlueNet Network / Small Connector Coupler. This coupler is used to join two Bluenet or Small Garmin Marine Network Cables together.
Our Price:$22.95
Garmin Marine Network Adapter Small to Large
The Garmin marine network adapter cable converts small (male) network cable to a large network connector in order to connect to your compatible Garmin chartplotter.
Our Price:$63.95
Garmin Small Connector Network Cable 12m
Garmin Small Connector Network Cable 12m. If extending a regular sized network cable, a GAX12531 coupler is required.
Garmin NMEA 2000 Backbone Cable 10 Meter
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$22.95
Garmin NMEA 2000 Female Terminator
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$22.95
Garmin NMEA 2000 Male Terminator
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$799.99
Garmin GHC 50 Autopilot Instrument
Large, 5-Inch, high resolution touch display for your compatible Garmin autopilot. The GHC 50 has a sleek, edge-to-edge glass display that matches current, high-end Garmin GPSMAP chartplotters. Wired and wireless remote-controlled options, plus Ethernet and WiFi Connectivity make the GHC 50 an advanced autopilot instrument display!
Requires a compatible Garmin autopilot, sold separately.
Our Price:$63.95
Garmin Small Connector 15m Right Angle
Garmin small connector network cable with right angle, 15m (50 feet).
Our Price:$49.95
Garmin BlueNet Field Installable Adapter Kit
The Garmin Field Installable Adapter Kit for the Garmin BlueNet Network allows for the easy routing of a Garmin BlueNet cable that does not have a factory installed connector.











