Autopilot Core Pack with VRF – Add Pump and Controller!
Simrad has made available, to their autopilot users, a VRF Core Pack which includes the core components to upgrade their existing autopilot. This includes high-current NAC-3 autopilot computer, Precision-9 solid-state compass, plus all necessary NMEA 2000® cables and connectors.
To use the Simrad NAC-3 VRF Corepack you must have a hydraulic pump or mechanical drive unit to suit your steering system, and choose a dedicated autopilot controller or Simrad multifunction display and you now have 
a complete autopilot system. Not designed for small boats the NAC-3 VRF Core Pack was constructed for IO or outboard powered boats 35' and greater. The Simrad NAC-3 VRF Core Pack eliminates the need for a mechanical rudder feedback unit making installation that much easier.
The NAC-3 VRF Core Pack is both NMEA 2000 and NMEA 0183 making its installation one of the easier ones considering its included hardware, automatic tuning and compass calibration. If your vessel is just in need of a computer and compass the NAC-3 VRF Core Pack should be a consideration for you.
Simrad NAC-3 VRF Autopilot Core Pack Details
Each Simrad NAC-3 VRF Autopilot Core Pack comes with:
Simrad NAC-3 Autopilot Computer
Precision 9 Compass
NMEA2000 Starter Kit
Fixing Screws
Warranty Card
Literature Pack
Two-Year Warranty
Simple Installation and Connection via NMEA2000
Heading Accuracy of +/- 2°
Designed for Outboard Boats greater than 35’ in Length
Control via AP44, IS42 and OP12 or Networked MFD
Simrad NAC-3 VRF Autopilot Core Pack Special Features
Product Accessories for Simrad NAC-3 VRF Autopilot Core Pack
Our Price:$24.95
SKU: NM5301
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Our Price:$29.95
SKU: NM1701
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Our Price:$48.95
SKU: NM1708
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$39.95
SKU: NM1704
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Our Price:$69.95
SKU: NVX12469
Navico NMEA 2000 Starter Kit
The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.
Our Price:$179.95
SKU: SIXOC17SUK42
Si-Tex Hydraulic Kit for Autopilots
Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.
Our Price:$31.95
SKU: NM1702
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Our Price:$31.95
SKU: NM1703
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Our Price:$20.95
SKU: NMFACFST
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$20.95
SKU: NMFACMST
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$49.95
SKU: NM1801
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Our Price:$1,129.00
SKU: NV15445002
Simrad Pump-3 12v Hydraulic Autopilot Pump
The Simrad Pump-3 Reversible hydraulic gear pump is designed for boats up to 50ft. in length with a cylinder displacement of 9.8-33.5 cubic inches.
Our Price:$13.95
SKU: NM5801
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$13.95
SKU: NM5501
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$2,499.00
SKU: NVRAMT212V
Navico Hydraulic RAM T2 12V
The Navico Hydraulic RAM T2 12V combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. The T2 12V provides maximum power with minimum consumption. This is a fully integrated hydraulic system with no external hoses or reservoirs.
Our Price:$659.00
SKU: NV13289001
Simrad AP44 Autopilot Controller
Simrad’s AP44 Autopilot Controller is perfect for the mariner interested in conveniently and easily controlling the functions of their autopilot. Rotary dial and button control, The AP44 has a 4.1-inch glass, color display. Simple setup and automatic tuning.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$1,049.00
SKU: NV13894001
Simrad AP48 Autopilot Controller
Simrad’s AP48 Autopilot Controller allows for complete control of your Simrad Autopilot. No Drift steering, depth contour tracking and automated turn patterns are all controlled from the 4.1” low profile, glass display.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$24.95
SKU: NMITCMCF
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Our Price:$24.95
SKU: NVX11979
Navico NMEA 2000 Micro T-Connector
The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.
Our Price:$59.95
SKU: NVX12612001
Navico 4-Way NMEA2000 Block
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
Our Price:$2,199.00
SKU: NVRAMT112V
Navico Hydraulic RAM T1 12V
The Navico Hydraulic RAM T1 12V combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. The T1 12V provides maximum power with minimum consumption. This is a fully integrated hydraulic system with no external hoses or reservoirs.
Our Price:$3,399.00
SKU: NV13788001
Navico Hydraulic RAM T3 12V
The Navico Hydraulic RAM T3 12V combines a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation. The T3 drive has a separate hydraulic pump to allow for greater mounting flexibility on this larger cylinder.
