The Furuno SCX 20 Satellite Compass is the first of its kind that uses a built in quad-antenna designed. The SCX20 is configured so that is creates six unique baselines that are able to calculate heading data to within 1 degree. Furuno's SCX 20 helps reduce loss of signal and with its compact design and flexible mounting options this Satellite compass would virtually work on any size boat.
You're able to connect the SCX20 to the NavNet TZ Touch units, NavPilot 300, FI70 and the GP39 to display critical information about your own vessel and surrounding ones. (Software Updates Required) You will also need to make sure that you have a NMEA 2000 Starter kit in place for the connection to work.
When pairing Furuno's SCX20 with a compatible radar, you're insured to get the most accurate, non-jagged, zig zag appearances on target trails that you may have seen in the past. The NavPilot 300 can benefit from the SCX20 making sure your headings are accurate and consistent thus getting you to your destination quicker and saving fuel along the way.
Radar and Autopilot aren't the only systems that the SCX's are capable of correcting. With the addition on the SCX20 onboard, your sonar will have a much cleaner appearance when there's a bit of chop. This helps you locate the bottom type you're looking for without struggling with the pitch and roll of the boat throwing your image off.
*NMEA 2000 T Connector Required
- SCX20 Satellite Compass
- Cable Assembly
- Gaskets, Screws and Adhesive
- Flush Mount Template and Installation Guidelines
- Operators Manual
- Two Year Warranty
- Includes Four Separate GNSS antennas for enhanced accuracy
- When paired with a Radar echo trails hold steady and are clearly depicted
- Full NMEA2000 Certification connects directly to any NMEA2000 network
- Outputs accurate Time, Position, Heading, COG/SOG, ROT, Roll/Pitch/Heave 3-Axis Speed, Air Temperature and Air Pressure data
- 1.0 degree heading accuracy, 0.02 knot speed accuracy
Product Accessories for Furuno SCX20 Satellite Compass - NMEA 2000
Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Furuno Pole Mount for SCX20 and SCX21
Furuno Pole Mount for SCX20 and SCX21 Satellite Compass.
Seaview Large Grey Plastic Cable Seal
The Seaview Large Grey Plastic Cable seal with split seal design allows for waterproof cable routing without removing connectors!
Seaview Large Stainless Steel Cable Seal
The Seaview Large Stainless Steal Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
Maretron NMEA 2000 Backbone/Drop Cable 2 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Seaview Small Grey Plastic Retro Cable Seal
The Seaview Small Grey plastic cable seal is designed to work with currently installed cables and provides a waterproof seal without removing and rerunning the cables!
Seaview Small Polished Stainless Steel Cable Seal
The Seaview Small Polished Stainless Steel Cable seal with split seal design allows for waterproof cable routing without removing connectors!
Seaview Large Black Powder Coated Stainless Steel
The Seaview Large Black Coated Stainless Steel Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
Seaview Multiple Cable Grey Plastic Cable Seal
The Seaview Multiple Cable Seal comes in grey plastic with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!
Seaview Multiple Cable Black Powder Coated Stainless Steel Cable Seal
The Seaview Multiple Cable Seal comes in Black Powder Coated Stainless Steel with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!
Similar Products and Value Bundles
Furuno SCX21 Satellite Compass - NMEA 0183
- FUSCX21
- MAN#SCX21
- ID#: 6327