Reliable on the water communication with Built-In GPS and AIS Receiver
The Lowrance Link-9 VHF Radio with DSC and built-in AIS receiver has a front mounted sleek design, seamless integration via NMEA 0183/NMEA 2000 and a large display with an intuitive user interface. Built with a new industrial design, the Link-9 follows suite with the high-end design of the Lowrance MFD’s making this a great addition to any vessel.
This VHF radio provides multiple ways to ensure you have the most accurate location data in the event of an emergency. Utilize the internal antenna, connect a compatible external antenna, or connect the Link-9 to a chartplotter via NMEA 0183/NMEA 2000 for further versatility. A dual channel, internal AIS receiver helps monitor the position of nearby AIS equipped vessels to enhance awareness in crowded harbors and the AIS information can be viewed on the Link-9 display or overlaid on a compatible MFD chart.
Some other key features of this VHF to make note of are the Track Buddy feature and navigation mode. The Track Buddy feature will allow you to automatically request the position of another vessel and provides the ability to track up to 5 other vessels at a specified minute interval of your choice. Display other vessels position on a compatible chartplotter just by entering their MMSI# into your contact list. In the event you’re primary chartplotter goes out, your Link-9 can turn into a navigational unit displaying speed and course and offers a MOB (man Over Board)feature as well. Hold down the NAV/MOB button to drop a waypoint and also have the ability to share it with other devices on your NMEA 2000 network.
- Link-9 VHF
- Link-9 VHF Suncover
- Fist Mic with Mounting Clip
- Bracket Mount with Knobs and screws
- Flush Mount
- Two Year Warranty
- Large Screen with Intuitive User interface
- NMEA0183 and NMEA 2000 Connections
- Built-In AIS Receiver
- Front Mountable Display makes for simpler installations
- New Design aligns with Lowrances series of MFD units
- Size (without bracket) : 8.2"W x 4.22"H x 6.43“D
Product Accessories for Lowrance Link 9 VHF with, GPS, AIS and DSC
Shakespeare 5225-XT Galaxy VHF Antenna
Shakespeare 5225-XT 8' (Reduced Length) Galaxy VHF Antenna - 6dB Gain.
Can not ship via air service, must ship ground service only!
Shakespeare PL259-CP-G Centerpin Connector
The Shakespeare PL259-CP-G Centerpin Connector allows quick and easy installation of a PL259 connect with no stripping or soldering required. Fits RG-8X and RG-58/AU coax.
Shakespeare 4187 Stainless Steel Ratchet Mount
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
Shakespeare 5218 Classic VHF Antenna
Shakespeare's 5218 offers a small, black stainless steel 19" whip antenna with magnetic mount. Simple and easy to install.
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Shakespeare 5104 Centennial 4 Foot VHF Antenna
Shakespeare 5104 Centennial 4 Foot VHF Antenna, 3db performance with a high-gloss finish.
Shakespeare 4188SL SS Rail Ratchet Mount Fits 1 to 1.5 Inch
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
Shakespeare 4184 Cable Outlet
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Shakespeare 5215 36 Inch VHF Antenna
The Shakespeare 5215 is a Sailboater's favorite thanks to its stainless steel construction and lightweight, low profile design.
Navico NMEA 2000 Starter Kit
The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Shakespeare ART-3 Antenna Radio Tester
Shakespeare ART-3 Antenna Radio Tester test the VHF radio and antenna for TX and RX.
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Shakespeare 4187-HD Stainless Steel Heavy Duty Ratchet Mount
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
Shakespeare 5241-R 36 inch SS VHF Antenna
Shakespeare 5241-R 36 inch SS VHF Antenna.
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Shakespeare 5400-XT 4' Galaxy VHF Antenna
Shakespeare 5400-XT 4' Galaxy VHF Antenna - 3dB Gain.
Shakespeare 4357 AM-FM-VHF Band Separator
The Shakespeare 4357-S FM/VHF Band Separator eliminates the need for a seperate AM/FM antenna by utilizing your existing VHF antenna.
Stainless Steel Mic Clip
Stainless Steel Mic Clip. 1 3/8 Wide x 1 13/16 Tall.
Shakespeare 414 Shim Kit for 4186, 4187, 3187 & 6187
Shakespeare Shim Kit for 4186, 4187, 3187 and 6187 Ratchet Mount. Kit includes Four (4) Shims, two (2) with front/back slope and two (2) with side/side slope. Each shim adds a half-notch (5°) tilt.
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Shakespeare 5215CX 36" VHF w/60' RG8X
The Shakespeare 5215 is a Sailboater's favorite thanks to its stainless steel construction and lightweight, low profile design.
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Shakespeare 5911 Emergency VHF Antenna
Shakespeare 5911 Emergency VHF Antenna
Navico NMEA 2000 Micro T-Connector
The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.
Navico 4-Way NMEA2000 Block
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.