Free 2-Day Shipping on Thousands of Items!
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Paired with a GHP20, GHP12 or Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Control your Garmin Reactor Autopilot right from a remote. This rugged and water resistant remote provides the ultimate onboard control and convenience. Control steering and even use the remote for heading hold and course corrections! (compatible with Compact Reactor, Reactor 40 Steer by Wire and Reactor 40 Hydraulic)
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
The GRID 20 from Garmin allows remote access to your entire Garmin marine system. Includes a 360° joystick with rotary knob and push to select button control. Available in Vertical or Horizontal orientation.
The Garmin TD 50 provides control at your fingertips even when space is limited! This 5-inch monitor displays engine and system data, allows for the adjustment of lighting, climate controls, entertainment, security sensors, autopilots and more! Easily integrate the TD 50 with your system via NMEA2000, OneHelm systems, EmpirBus and the Garmin Marine Network System.
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).
Garmin NMEA 2000 Multiport T-Connector.
The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.
The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.
The GRF 10 Rudder Feedback Cable extends the cable length 15 meters (49.2 feet).
The Garmin 1.2L Pump for the Reactor 40 Autopilot is designed as an affordable option for single-cylinder applications with cylinder volumes from 6 to 14 cubic inches. An autopilot pump is required to make a complete Reactor 40 Autopilot system.
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
The Garmin SmartPump V2 Hydraulic Autopilot Pump for Reactor 40 Pilots provides a smaller footprint with the same power and efficiency as previous versions.
The Garmin 2L Pump for the Reactor 40 Autopilot is designed for boats with hydraulic steering between 10 and 24ci. An autopilot pump is required to make a complete Reactor 40 Autopilot system.
Large, 5-Inch, high resolution touch display for your compatible Garmin autopilot. The GHC 50 has a sleek, edge-to-edge glass display that matches current, high-end Garmin GPSMAP chartplotters. Wired and wireless remote-controlled options, plus Ethernet and WiFi Connectivity make the GHC 50 an advanced autopilot instrument display!
Requires a compatible Garmin autopilot, sold separately.
The GRF 10 Rudder Feedback Cable extends the cable length 5 meters (16.4 feet).
