Free 2-Day Shipping on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.
Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.
PropSpeed's FoulFree Transducer Coating Kit is the biggest advancement in transducer paint and coatings in the last 30 years. It will keep your thru-hull or transom mount transducer free of marine growth. This nontoxic formula has zero leaching of harmful chemicals into water unlike traditional anti-fouling bottom paints and is certified by Airmar.
The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.
The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.
Scanstrut’s smallest wireless phone charging mount! The Scanstrut Nano is a 10W waterproof wireless charger that holds your phone securely while charging it. This ultra-compact design can be installed and used in any orientation.
The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
Protect your motor and blade from impact with the skeg for Force Kraken trolling motors.
Select Color Below.
The Garmin BlueNet 30 Gateway allows legacy Garmin marine devices to network with Garmin BlueNet network units.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).
The Shakespeare gold plated brass PL-258-CP-G joins two cables together in a snap. No stripping or soldering required. For RG-8X or RG-58/AU coax cable. Barrel connector for PL-259-ended cables.
The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Garmin marine network adapter cable converts small (male) network cable to a large network connector in order to connect to your compatible Garmin chartplotter.
The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.
The Seaview Aft Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. The NGX-1-ISO is equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.
Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!
Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with many 24-inch radar domes.
The Seaview Small Polished Stainless Steel Cable seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus using this Garmin adapter plate.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 7x3 into the existing cutout of a GPSMAP 7x2 or 7x2 Plus using this Garmin adapter plate.
The Raymarine RNS-5 network switch allows for easy expansion of Raymarine systems using RayNet high-speed Ethernet cabling. Need more than 5 ports? Two RNS-5 switches can be daisy-chained together for larger systems.
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: Black.
Position your LiveScope XR LVS62 with the 0-degree pole mount for optimal viewing!
The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.
The SiTex AIS Zero Loss Antenna Splitter Module allows for full use of VHF communications and AIS send/receive with a single VHF antenna. The MDA-3 is designed for use with Class B AIS Transceivers.
The Garmin BlueNet Network to RJ45 Adapter Cable connects compatible Garmin devices with a Garmin RJ45 port to the Garmin BlueNet network.
Network compatible Garmin devices with the 6 foot BlueNet Marine Network Cable.
Add the Garmin Power Receptable to your compatible Garmin Force trolling motor to add a 70A power receptacle.
The 60A Garmin Circuit Breaker is used when installing a compatible Force Trolling Motor.
The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.
Extend your Garmin 6-pin transducer cable 20 feet with the Airmar Transducer Extension Cable.
The Seaview Modular Aft Mount and Plate with Light Bar Bundle includes the standard Seaview 5" Aft Raked Modular Radar Mount Base, Seaview Modular Plate for Dome Radars, Seaview Light Bar and the Seaview Combination Mast Head All Around LED Light.
The JL Audio Connection Cable allows you to easily connect non-NMEA 2000 remote controllers with a MediaMaster source unit. The JL Audio MMC-25 cable is 25 feet long.
The Navico Ethernet Adapter Cable Green M12M 8-pin - Yellow 5-pin female (1.2 ft) works to adapt yellow ended ethernet cables to the NEP-3 port expander.
Stainless Steel Clam Shell, Large 2.25" W x 2.25" L
Almo Wire's 14 Gauge 2 Conductor wire comes in a 100' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 14 Gauge 2 Conductor wire comes in a 250' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 16 Gauge 2 Conductor wire comes in a 100' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 16 Gauge 2 Conductor wire comes in a 250' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.
The Seaview Small Grey plastic cable seal is designed to work with currently installed cables and provides a waterproof seal without removing and rerunning the cables!
