Garmin's GT15M-IH In-Hull Mid-band CHIRP Transducer provides accurate depth readings and is compatible with Garmin STRIKER, echoMAP CHIRP, echoMAP Plus, echoMAP UHD, GPSMAP chartplotter/sonar combination units and GSD25.
Shipping!
Next Day Shipping, Delivery by Christmas!
Garmin's GT15M-IH In-Hull Mid-band CHIRP Transducer provides accurate depth readings and is compatible with Garmin STRIKER, echoMAP CHIRP, echoMAP Plus, echoMAP UHD, GPSMAP chartplotter/sonar combination units and GSD25.
Garmin GT8HW-IH In Hull CHIRP Transducer is designed to be mounted inside the hull of your boat. This 250 Watt Transducer can reach maximum depths of up to 800'. Transducer comes with 20' transducer cable with Garmin 8-pin connector.
Designed for boats with less than a 6° deadrise
Garmin 010-10327-20, P79 8 Pin Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees.
The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) No Connector, For Bare Wire Install.
The Garmin M265C-LH is a top performing, 1kW In-Hull Transducer providing crystal clear underwater detail. Reaching 3,000' the M265 CHIRP operates at a frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise.
Airmar M260 traditional 1kW 50/200 kHz in-hull transducer. The M260 transducer provides depth only and includes the plastic housing and mounting tank. 6-Pin Garmin Mix and Match Cable Included.