.webp "Simrad NAC-3 Autopilot Computer")
.webp)
.webp)
.webp)
.webp)
NAC-3 is the Core of your Autopilot Setup for vessels above 35’ in length!
The Simrad NAC-3 Autopilot Computer is recommended for boats over 10M (35 feet). It is rated to operate high-current drive pumps including the Simrad RPU160 and RPU300, mechanical drives including the Simrad DD15, hydraulic linear drives including the HLD2000 series and solenoid valves.
Being built with Virtual Rudder Feedback (VRF) eliminates the need to install a separate rudder feedback unit on outboard and sterndrive boats. This reduces overall autopilot system cost and complexity, making it ideal where a feedback unit is impractical due to mechanical constraints. However, for all of you Simrad RF25 and RF25N users, the NAC-2 does support both rudder sensors via NMEA 2000.
For Complete autopilot setup, a compatible Simrad or B&G display, and pump/drive are required.
The NAC-3 is compatible with:
Simrad NAC-3 Autopilot Computer Box Contents
Each Simrad NAC-3 Autopilot Computer Comes with:
- Simrad NAC-3 Autopilot Computer
- NMEA2000 T Connector and 0.6M NMEA Drop Cable
- Two Year Warranty
Simrad NAC-3 Autopilot Computer Key Features
- Designed for Boats above 10M (35’) in length
- Plug and Play connectors for simplified installation
- NMEA2000 Connectivity
- Supports Simrad’s RF25 and RF300 Rudder Feedback
- Virtual Rudder Feedback (VRF) for easy installion aboard outboard and sterndrive boats
- Size: 8.1W x 2.2"H x 7.5“D
Product Accessories for Simrad NAC-3 Autopilot Computer
Our Price:$179.95
SKU: NM2KSTR
Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.
Our Price:$24.95
SKU: NM5301
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Our Price:$29.95
SKU: NM1701
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Our Price:$69.95
SKU: NVX12469
Navico NMEA 2000 Starter Kit
The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.
Our Price:$48.95
SKU: NM1708
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$39.95
SKU: NM1704
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Our Price:$31.95
SKU: NM1702
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Our Price:$31.95
SKU: NM1703
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Our Price:$20.95
SKU: NMFACMST
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$49.95
SKU: NM1801
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Our Price:$13.95
SKU: NM5801
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$20.95
SKU: NMFACFST
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$13.95
SKU: NM5501
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$699.00
SKU: NVX12607001
Navico Precision-9 Compass
Navico's Precision-9 Compass provides heading and rate-of-turn information to Simrad, B&G and Lowrance autopilot, radar and navigation systems. NMEA2000 Connectivity.
Our Price:$389.00
SKU: NV12316001
Lowrance WR10 Wireless Remote
The Lowrance WR10 Wireless Remote provides you the ability to take control of your autopilot from anywhere on your boat with this easy to use, pocket size, wireless remote controller. Includes BT1 Bluetooth Base Station.
Our Price:$2,499.00
SKU: NVRAMT212V
Navico Hydraulic RAM T2 12V
The Navico Hydraulic RAM T2 12V combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. The T2 12V provides maximum power with minimum consumption. This is a fully integrated hydraulic system with no external hoses or reservoirs.
Our Price:$659.00
SKU: NV13289001
Simrad AP44 Autopilot Controller
Simrad’s AP44 Autopilot Controller is perfect for the mariner interested in conveniently and easily controlling the functions of their autopilot. Rotary dial and button control, The AP44 has a 4.1-inch glass, color display. Simple setup and automatic tuning.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$1,049.00
SKU: NV13894001
Simrad AP48 Autopilot Controller
Simrad’s AP48 Autopilot Controller allows for complete control of your Simrad Autopilot. No Drift steering, depth contour tracking and automated turn patterns are all controlled from the 4.1” low profile, glass display.
Autopilot Core Pack Required. Not Included and Sold Separately.
Our Price:$24.95
SKU: NVX11979
Navico NMEA 2000 Micro T-Connector
The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.
Our Price:$29.95
SKU: NM1702M
Maretron NMEA 2000 Backbone/Drop Cable 2 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.
Our Price:$24.95
SKU: NMITCMCF
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Our Price:$349.00
SKU: NVX10756001
Simrad RF25N Rudder Reference
The Simrad RF25N rudder feedback is a medium duty rudder feedback that translates the angular travel of the rudder to a connected NMEA 2000 device. The RF25N connects via NMEA 2000 and features an attached 5.5m cable.
Our Price:$2,199.00
SKU: NVRAMT112V
Navico Hydraulic RAM T1 12V
The Navico Hydraulic RAM T1 12V combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. The T1 12V provides maximum power with minimum consumption. This is a fully integrated hydraulic system with no external hoses or reservoirs.
Our Price:$3,399.00
SKU: NV13788001
Navico Hydraulic RAM T3 12V
The Navico Hydraulic RAM T3 12V combines a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation. The T3 drive has a separate hydraulic pump to allow for greater mounting flexibility on this larger cylinder.
