Raymarine Autopilots

The Raymarine Evolution EV150 Autopilot with Pump and Hydraulic Hose Kit Bundle includes the standard Raymarine EV150 Autopilot with Pump and Si-Tex Hydraulic Kit for Autopilots.
Instant Savings with Value Bundle

The Raymarine EV150 Autopilot is a complete package and ready to install. The EV150 package is designed for 12V systems and includes a p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.

The Raymarine EV150 Autopilot Rudder Reference Bundle includes the standard Raymarine Evolution EV150 Autopilot with Pump and the Raymarine Rotary Rudder Reference. The EV150 package is designed for 12V systems and includes a p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.
Instant Savings with Value Bundle!

The Raymarine EV100 Autopilot is designed to steer your sail vessel for you. Designed for boats under 16,500 lbs, the EV100 is quick and easy to install and fits most type of wheels.

The Raymarine Evolution EV100 Autopilot is the perfect solution for vessels with single outboard engines and hydraulic steering. Packaged With the EV1 Sensor Core, AC100, P70Rs, 0.5ltr Hydraulic Pump and Evolution Cabling Kit this complete set-up is designed for boats with steering system fluid capacity of 3.1 cubic inches to 6.7 cubic inches.

The EV-400 Power Pilot was designed for large powerboats with hydraulic steering. The included EV-1 Sensor Core is sophisticated and uses aerospace technology to adapt and evolve to fast changing sea conditions!
Drive Not Included, Sold Separately.

The ACU-200 is a critical part of an Evolution autopilot system! Housing the main power and drive electronics for direct connection to your vessel’s steering system and 12V DC electrical source, the EV200 must be combined with additional components to create a full autopilot system.

The Raymarine Type 1 Pump for Autopilots is a 12 volt reversing hydraulic pump for use with boats with steering system fluid capacity of 4.9 cubic inch to 14 cubic inches.

The Raymarine Type 2 Pump for Autopilots is a Reversing hydraulic pump for use with steering systems equipped with 14–21 cubic inch (230-350cc) hydraulic steering rams.

The Raymarine Evolution EV200 Autopilot brings ease of installation, calibration and use, to the Autopilot market. With the EV1 Sensor Core, AC200 and P70Rs, your trips offshore will more relaxing and enjoyable.

The Raymarine Evolution EV200 Autopilot brings ease of installation, calibration and use, to the Autopilot market. With the EV1 Sensor Core, AC200, P70R and Type 1 Hydraulic Pump your trips offshore will more relaxing and enjoyable.

The Raymarine EV100 Tiller Autopilot is a complete package and ready to install. The EV100 package is designed for tiller steered sailboats up to 13,200 lbs and includes a p70Rs autopilot controller, EV1 Sensor Core, ACU100 Actuator Control Unit and Tiller Drive.

The Raymarine Evolution EV200 Sail Pilot with Type 1 drive brings ease of installation, calibration and use, to the Autopilot market. With the EV1 Sensor Core, AC200, P70R and Type 1 12V, mechanical linear drive your voyages will become more relaxing and enjoyable.

The Raymarine Evolution EV200 Sail Pilot without drive is for those looking to upgrade an older autopilot system without having to replace the drive. Pair with your existing Type 1 mechanical linear drive system and you’re ready to go. Simple setup and calibration. Includes EV1 Sensor Core, ACU200 and p70s control.

The Raymarine EV-400 Sail Pilot was designed to be the perfect autopilot solution for large sailboats with mechanical steering. The EV-400 Sail Pilot includes the sophisticated EV-1 sensor core that uses aerospace guidance technology to adapt and evolve to fast changing sea conditions!

The Raymarine Type 2 Short-Stroke Linear Drive for Mechanical Autopilots is designed for boats up to 33,000 lbs (15,000kg) displacement and a max stroke of 300MM (12").

The Raymarine 12 Volt Type 2 Rotary drive for vessels up to 44,000 lbs displacement (20,000kg) are designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket (typically cable and rod-steering type systems.)

The Raymarine Type 2 Hydraulic Linear Drive for Mechanical Steered Autopilots is designed for boats up to 48,000 lbs (22,000kg) displacement.

The Raymarine Type 2 Hydraulic Linear Drive for Mechanical Steered Autopilots is designed for boats up to 77,000 lbs (35,000kg) displacement.

The EV300 autopilot is designed for onboard vessels with solenoid-controlled electro-hydraulic steering systems. Accurate and reliable steering is provided by the ACU300 actuator control unit’s interaction with the boat’s steering gear solenoids. This sophisticated autopilot required no complicated setup or autopilot calibration.