Transducers

All in One HD-ID 500W (77/200kHz) and 500W (455/800kHz) ClearVu Transom Mount Transducer with a 4-Pin connector. Compatible with Garmin echo dv/cv Fishfinder Series. Replaces Garmin 010-12758-00.

Garmin's GT56UHD-TM Transducer pairs with specific Garmin units to provide exceptional Ultra High Definition images of fish and structure below and to the left and right of your vessel! The GT56 provides accurate depth and water temperature readings.

Garmin's GT52HW-TM Transducer provides depth and temperature readings. Perfect for Freshwater fishing or shallow saltwater fishing the GT52HW includes CHIRP Traditional Sonar and CHIRP ClearVu and CHIRP SideVu for near photolike images below and to the left and right of your boat while consistently displaying crisp clear fish arches and enhanced target separation.

The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).

Garmin GT51M-TM 12-Pin 600W CHIRP (Mid-Band CHIRP 80-160kHz) and 500W (CHIRP 260/455kHz) ClearVu/SideVu Transom Mount Transducer. Built-In Temperature Sensor. Compatible with Garmin GPSMAP 7600xsv Series and GSD25.

Garmin's GT54UHD-TM Transducer pairs with your Garmin GPSMAP 8400/8600xsv series and echoMAP Ultra GPS/Fishfinder to provide exceptional High Definition images of fish and structure below and to the left and right of your vessel! The GT54 also provides accurate water temperatures.

The Furuno Transom Mount Dual Frequency Transducer provides accurate depth, speed and temp readings for Furuno fishfinders and sounder modules. 600 Watts and 50/200khz frequencies.(Depth/Speed/Temp).

The Lowrance HDI 83/200 & 455/800khz Skimmer Transducer.

Navico's active imaging 3 in 1 transducer pairs with Lowrance HDS LIVE, HDS Carbon and Elite Ti2 displays as well as Simrad GO and NSS Evo3 units and offers M/H CHIRP, DownScan and Sidescan with temperature readings.

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

Furuno 525TLTD20, B60-20 Low Profile Bronze Thru-Hull Transducer with 20 degree tilted element and temp. Designed to works on boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)

Garmin’s Livescope Plus offers real time views of fish and structure below your boat! 35% improved target separation, better resolution, reduced noise and clearer images are just a few of the benefits of the Livescope Plus. Includes GLS 10 Box and LVS34 Transducer along with 3 mounting options including the perspective mode mount!

Furuno Bronze Thru-Hull dual frequency 50/200kHz triducer(speed, depth, and temp). Fairing Block Included.

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

Garmin 010-10982-21, 8 Pin B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element and temp is designed to work on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block.
(Depth/Temp)

Garmin 010-10982-20, 8 Pin B60-20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Designed for boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Garmin GT20-TM 8-Pin Traditional 500W (77/200kHz) and 500W (455/800kHz) DownVu Transom Mount Transducer. Built-In Temperature Sensor. Compatible with Garmin echoMap 50dv, 70dv, GPSMAP 5x7, 8x0, 10x0 and 7600xsv Series.

Garmin GT8HW-IH In Hull CHIRP Transducer is designed to be mounted inside the hull of your boat. This 250 Watt Transducer can reach maximum depths of up to 800'. Transducer comes with 20' transducer cable with Garmin 8-pin connector.
Designed for boats with less than a 6° deadrise

Lowrance XSONIC P79 Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The in-hull transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees. 50/200khz Transducer.

The B275C-LH-W CHIRP Transducer is ideal in shallow to deep water applications. With its Wide Beam Angle the B275 provides 2x the coverage under the boat when compared with the other CHIRP transducers on the market today. (Low and High Frequencies, Depth and Temp). Includes 9-Pin XSONIC Connection to Lowrance and Simrad units.

The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.

The Airmar R599LM is a 2-3kW low to medium frequency transducer delivering deep water performance down to 10,000'. The R599LM is an in-hull design and includes a tank which is cut to the boat's deadrise post purchase and affixed inside the hull.

The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

This single, easy-to-install transducer provides fish-finding and structure imaging to your Recon Freshwater Trolling Motor. Powerful sonar including CHIRP, SideScan and DownScan imaging all come together to provide highly detailed sonar imagery!
Compatible with Freshwater Recon Trolling Motors Only. Not Compatible with GHOST Trolling Motors.

The Garmin Transom Mount Dual Frequency 50/200khz Transducer provides accurate depth and temp readings to your GSD 20/21/22, Garmin Chartplotter/Sounder or Garmin Fishfinder.
(Depth/Temp)

The Furuno 235DST-MSE is a Thru-Hull Smart Sensor that operates at 235khz so that it will not interfere with your 200khz fishfinder. This transducer will provide numerical depth, speed and temperature readings to your compatible Furuno display.

The Raymarine Transom Mount Transducer for Clearpulse sonar provides accurate Depth, Speed and Temperature to your Raymarine Sounder. The P58 style transducer allows for clean water flow across the surface of the transducer for better readings.

The Lowrance 106-72, HST-WSBL, is a 83/200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable.

Navico Transom Mount Transducer with CHIRP Technology. Depth and Temp.

Garmin B175 1kW medium frequency CHIRP transducer, 8-Pin Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

Garmin's GT15M-IH In-Hull Mid-band CHIRP Transducer provides accurate depth readings and is compatible with Garmin STRIKER, echoMAP CHIRP, echoMAP Plus, echoMAP UHD, GPSMAP chartplotter/sonar combination units and GSD25.

Garmin's GT23M-TH Mid-Band CHIRP Thru-Hull Transducer provides depth and temperature readings. Perfect for Coastal or Offshore fishing the GT23M includes CHIRP ClearVu for near photolike images below your boat.

Garmin's GT 22HW-TM Transducer provides depth and temperature readings. Perfect for Freshwater fishing the GT22 HW includes CHIRP Traditional Sonar and CHIRP ClearVu for near photo-like images below your boat while consistently displaying crisp clear fish arches and enhanced target separation.

Furuno TM185M Medium Frequency Plastic Transom Mount CHIRP 1000 Watt Transducer is perfect for outboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Medium Frequency for Depth and Temp.

Garmin's GT23M-TM Mid-Band CHIRP Transom Mount Transducer provides depth and temperature readings. Perfect for Coastal or Offshore fishing the GT23M includes CHIRP ClearVu for near photolike images below your boat.

Garmin GT51M-TH 12-Pin 600W CHIRP (Mid-Band CHIRP 80-160kHz) and 500W (CHIRP 260/455kHz) ClearVu/SideVu Thru-Hull Transducer. Built-In Temperature Sensor. Compatible with Garmin GPSMAP 7600xsv Series and GSD25. Designed for boats with less than a 5 degree deadrise.

The Navico plastic replacement bracket for StructureScan 3D and TotalScan transducers allow for mounting directly to the transom, on the jackplate or under the step.

The Active Imaging HD 3-in-1 Transducer provides high-definition views of CHIRP, SideScan and DownScan Imaging with increased clarity! Compatible as a direct connection with the Lowrance HDS PRO series. Compatible with HDS LIVE, HDS Carbon, Elite FS and Simrad NSSevo3S, NSS evo3 and GO series displays with the addition of an S3100 module (Sold Separately).

The Lowrance Active Imaging HD transducer provides Lowrance High/Medium CHIRP, SideScan and DownScan imagery. Enjoy Lowrance FishReveal DownScan and SideScan when paired with an S3100 sonar module, sold separately.

The Garmin GT12M-THF is a flush mount thru hull transducer with a 0-degree tilt, suitable for vessels with a deadrise of 0-7 degrees. The GT12M-THF is ideal for midsize fishing and cruising boats and features 350W mid-band CHIRP sonar.

The P79 Flange Kit includes a replacement plastic mounting base and locking ring and is compatible with all P79 transducers.

Airmar B175 1kW high-wide frequency CHIRP transducer, Navico XSONIC 9-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B744V 600W traditional dual frequency transducer, thru-hull with Fairing Block. 6-Pin Garmin Mix and Match Cable Included.

Airmar P79 600W Plastic Dual Frequency In Hull Transducer. 6-Pin Garmin Mix and Match Cable Included.

Airmar B60 600W traditional dual frequency transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 8-Pin Garmin Mix and Match Cable Included.

The Airmar Mix & Match Cable for Navico XSONIC M/H CHIRP Transducers is 1m in length connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and your compatible Navico fishfinder's 9-Pin XSONIC connector on the other side.